Separate names with a comma.
Factory control arms with brand new Energy poly bushings. Cleaned and painted they look brand new. Used only for mock up and then replaced. $80...
Wire the output source from the alarm to a tyco relay to activate it. Run "hot' power to the switched contact of the relay and from the relay to...
Thanks, Shane. I sent you a PM back as well.
Shane, What kind of shape is the X303 cam in? How many miles etc.? Frank
Sending you a PM.
Wes, PM'd you about the cam again. Frank
X2 on the VSS (Vehicle Speed Sensor). The speedometer works off the mechanical part of it and the computer gets it's reading from the electronic...
Your all set with the drive shaft you already have. Go for it.
X7 on getting new gaskets. Remember your going to have to follow the torque sequence when tightening the heads down and you'll have different...
I had a 93 with an auto that did the same thing. There was actually a TSB for the car back then and the dealer replaced the balancer for free.
X2 on a ground issue. Make sure the wires are tight in the terminal and that the terminal itself is tight.
I'd like the shifter if it's still available.
Put me in line for the cam. PM sent