Separate names with a comma.
It starts! Runs great with MAF unplugged not what that's about because it was the one I was using prior to install. Time to order a mega squirt.
It smells really rich so I don't think that's it
I just completed the install, starts up runs for about 7 seconds then shuts off. I tried to rev the throttle and all it does is backfire and then...
Looks good! I think Ill have to hit up some salvage yards and see what I can find. Are you able to retain the factory coolant reservoir?
Thanks for the help, with the advice I now have the correct belt length! Next problem I have is clearance between the crank pulley and electric fan.
I'm having trouble figuring out the correct length accessory belt after installing my S trim, what length do I need?
Swapped out the clutch for another, same part # and installed it just like the other and this time no issues. I believe that I had a bad part.
Prior to purchase Ive been reading this and other threads, haven't seen this questions asked: Can you retain cruise control functionality after...
Thanks for that link, I'm wondering if the disk is not compatible with the pressure plate. You can only install the disk one way when I flipped it...
The throw out bearing was installed correctly and the clutch fork is in good shape.
the figures went slightly inward toward the fly wheel when torquing it down. I dont have my old clutch I swapped it out for new under warranty.
It's a stock replacement from AutoZone. I had one under warranty so swapped it for new while changing the rear main seal.
[ATTACH] [ATTACH] Installed a new clutch and pressure plate, while installing the transmission I noticed that even with the clutch cable tightened...
The spare (7) caused my battery to drain in less than an hour, after removing I never had another battery issue.
I was hoping maybe TMI guys might chime in and offer solutions
I was wondering about doing that and maybe getting softer springs to allow the seat to sink down more
I recently redid my interior on my 1992LX Hatch and everything came out pretty good other than one issue that Im trying to resolve. The seat...
I have a craftsman professional impact no issues it was cheaper than others I was looking at. Ingersoll Rand makes some of the best stuff just a...
Flex A Lite 33054 controller in the mail hopefully I'll be done with this fan set up for good.
The controller I have now just cycles on and off rapidly worked fine for the first few weeks