Search results

  1. KENS89LX

    96 Gt Wth Theft Light And Wont Start!!!

    MY 96 gt will not start and the theft light is blinking fast, I've tried the key in the door, and unhooked the battery for reset, but still same. Now a few months ago I lost the keys so had a locksmith make new ones could of something happened to the key, what should I try next I heard there...
  2. KENS89LX

    96 Gt Instrument Cluster

    Ok thanks for the info
  3. KENS89LX

    96 Gt Instrument Cluster

    What years will the instrument cluster will fit the 96 gt? I'm guessing 96-98, but not sure, that is same plug-in.
  4. KENS89LX

    Engine Smokes...

    Ok, was trying to figure what you were talking about. Anyway it just don't make sense it started all at once.
  5. KENS89LX

    Engine Smokes...

    No, that was it. I will check the plugs, I also saw online about the pvc, where is it located on the 4.6?
  6. KENS89LX

    Engine Smokes...

    The 4.6 in my 96 gt is now using oil at a pretty good rate, (out the tailpipe) the only thing is that it was fine before I changed the intake gasket and changed oil!
  7. KENS89LX

    Changing Oil Cooler Adapter Gasket

    Ok thanks, didn't have the correct wrench for that so I put it back together now I don't see an oil leak, put cardboard under the car overnight, with no drips.
  8. KENS89LX

    Changing Oil Cooler Adapter Gasket

    Just took oil filter off but can't get to the bolts does the piece with the coolant hose come off, looks like a Allen wrench in the center where the oil filter goes on
  9. KENS89LX

    Changing Oil Cooler Adapter Gasket

    Getting ready to replace the gasket on the oil cooler I've seen videos on how it is done, didnt see any of them use gasket sealant, is that right?
  10. KENS89LX

    Issues With 96 Gt- Part Two

    took intake off, no crack found new gasket seemed to fix that leak, now it seems to be coming around the rear bolt passenger side, not running out but seems to be wet, should have I put gasket sealant on it?
  11. KENS89LX

    Issues With 96 Gt- Part Two

    it seems to be seeping where the intake is seated on the head, dont see no crack, thats why i thought gasket. not sure i can afford the Ford, but i will shop around. thanks for the info..
  12. KENS89LX

    Issues With 96 Gt- Part Two

    I just found a coolant leak, right above #4 cylinder, at the intake. What's the best route a new intake seen one on ebay for about 129.00, or is the gasket a common problem with these 4.6, and what brand of gasket is the best.
  13. KENS89LX

    Just Bought 96gt With Issues

    I will check it out, thanks.... that big red ground cable can someone help me on approximate location of the hole for the cable. I looked but just didn't see it
  14. KENS89LX

    Just Bought 96gt With Issues

    This is on a 96 gt it is under the engine toward the front and what does it ground
  15. KENS89LX

    Just Bought 96gt With Issues

    I just purchased a 96 gt, the issues are many but I'll start with the gauge cluster the water temp is pegged I unplugged the sensor on the engine with no change, and the fuel gauge also is not working correctly only goes to half when tank is full, I am new to sn95s so any help on things to check...
  16. KENS89LX

    Ball Joint ??

    Ok thanks, I have the steeda bumpsteer kit on it, the rag joint is right by the headers?
  17. KENS89LX

    Ball Joint ??

    Well, hot that one done, had to cut the old joint at about where the threads started to get the press to work, with the adapters I had to use. Now for a al I alignment, seems to wonder all over the road thought maybe the new ball joint would help but it didnt..
  18. KENS89LX

    Ball Joint ??

    alright, thanks
  19. KENS89LX

    Ball Joint ??

    I am replacing my ball joints tomorrow, and need to know if a 95 v-6 is the same as a v-8. I also need to know if they would fit in a 89 lower control arm. I switched it over to five lug years ago from a 95 v6.