Search results

Also when you put the new gasket into the opening in the tank tie a loose loop of string around it with the other end tied off or long enough to keep a hold of it so that if you are as lucky as I was the first time I did this, and manage to push the new gasket into the tank, you can just pull...

644 here in KC metro also :mad:

Does someone have the Gen2 part number? the links in the first page are the same part number but dif pics? Also what is the max mounted depth of the Gen2? Thanks, Jake

I bent mine back up and put 2 bolts up through it into the back console bracket, You could also use a couple of really strong self tapping metal screws.

Advance auto parts has a really nice puller that uses fingers that get under the cutout on the pilot, I used it last night after trying all the do-it-yourselfs and failing! Jake

I have one, it needs to have the ford large to small conversion (1310 to 1330) u joints, it is 45.5 (I think) inches long. You reuse your spline and tail housing mounts on the aluminum driveshaft. It is also only 3" versus 3.5 for the FRP one. I checked with Spicer who makes the alum one and...

Thanks everyone, I am at the point where I am trying to decide if I should just switch out to a new HP slim SPAL or other fan. I NEED :p to get this supercharger in the car!!!! :D Jake

How much can the stock fan shroud be cut down to add clearance for a supercharger pulley? I have a 3 core radiator and have already take off the fan dome but I still need about a 1/4 of an inch more clearance. Thanks, Jake

Does anyone have a 6.5" 94/95 Powerdyne Supercharger Crank Pulley that they would sell to me? Thanks in advance! Jake

I bought a new one from autozone and it is much smaller in diamater than the old one. I was able to get in on with a standard deep well metric socket. The old one was a PITA! I had to take off the oil filter and the stud on the water pump and use a vice grip to get it loose. MD

Pics no workie..... :shrug:

What is up with www.DcControl.com? it just has a email address and some forums listed only (Now Serving: and 4 forums)? EDIT: I found Baskin's post. mimimun post count to order a unit?

I looked through your old post..... WOW :D lots-O-info on this issue! So I take it a new CCRM "may" fix the issue or I can buy another fan controller or the manual switch options? Thanks! Jake

I haven't had a chance to check the CCRM voltage but I did a KOEO test last week and the fan ran in both speeds, I am just pretty sure I haven't heard it go to high on MAX AC, I should be able to check and let ya know. Thanks! Jake

If anyone wants the info, the factory wires both are about 57". I used 2 gauge wire for both sides and all the way to the starter. I added an extra frame ground on the pass side motor mount to the sway bar mount. I also relocated the main ground from the water pump to the motor mount and to the...

Yea, on my car the high speed fan doesn't come on until the high temp threshold is hit even with MAX AC running. Oh well, it doesn't overheat but it seems strange for it to not just stay on. Is that an issue with CCRM or just a fluke with the computer? :nonono: The wiki looks good!

Good info here but can i ask a couple of related questions? So at idle should the compressor shut off eventually? I have cold A/C but my compressor never seems to shut off at idle. Also should the high speed fan always come on with the A/C or just if the temp is high? Also it does this in...

I have searched and can’t seem to find a full replacement battery harness or even the total length of both sides of the battery harness. Does anyone know what length the positive and negative battery cable / harness is? Thanks, Jake :)

Kansas is kinda a big state.... can you be more specific? :D

I have one sitting in my storage shed, you can have it just pay for the shipping from 64056.