Search results

I used a 190lph pump when my pump went bad and I experianced problems because it only comes with the electrical part, and not the whole unit. When you replace make sure you replace the whole unit or you may run into problems like I did. GOOD LUCK:nice:

Ok so this is the second time I have posted this and I have found out a number of things that arent wrong with my car, but lets start with what it's doing. Every morning I go out and start my car, and it takes sometimes a few seconds of the starter turning before it turns over the...

Ok so I've been having some strange issues lately that have gotten progressivly worse. Mycar has trouble starting every morening. It takes 2-3 trys for it to turn and if I do not let it warm up it wont start back up for many trys. I've noticed that when running it will buck here and there and...

My car has been having some issues with what seems to be either wires or distributor. I want to check see if the wires are all in the right spots, however the haynes book doesnt explain very well. Does anyone know where I can find what wire goes from what cylinder to what post on the ditributor...

Ok guys heres whats happening. My car is having trouble starting. In thew morning it takes 2 trys to start it. After that if I dont let it completely warm up it wont start again when I shut it off, and I have to wait like 15 minutes before it will start again. I checked it out and found that...

Ok guys heres whats happening. My car is having trouble starting. In thew morning it takes 2 trys to start it. After that if I dont let it completely warm up it wont start again when I shut it off, and I have to wait like 15 minutes before it will start again. I checked it out and found that...

I have a 95 gts mustang and I'm installing a fidanza aluminum fly with a 28 and 50 oz balancer, a king cobra clutch kit, ford racing 3:55 gears, and ford racing differential clutch kit. What Gains will I be seeing with this?

Thanks guys :nice:

:bang: I just wanted to know if my 95 mustang gts came with a lsd rear? please help meeee

just wondering if the bbk intake manifold kit for the 86-93 mustang fits the 94-95 mustang. From what I believe it is the same engine just wasn't sure if anyone else knew. Thanks guys

I'm looking for a rebuilt bored .030 over 306 shortblock for my 95 mustang but I'm not sure where to look. I want it to be capable of up to 400 rwhp so that meens fully balanced and blueprinted would be nice because I wan't relatively no friction in bottom end. It will be a n/a build so please...

thanks guys

Im building my 302 with a bored 306 block flattop 9.5:1 pistons and trickflow topend. could anyone help me with what brands would be good for the fuel rails and injectors? I allready have a 190 lph pump installed. Thanks

Im rebuilding a 302 bored over 30 to a 306 and I just wanted to know what parts would be good for my build. Im getting a ford racing top end kit with the gt40 aluminum heads and i also wanted to get some new better than stock parts to bolt up to it heres the parts I'm not sure about -fuel...

Thanks for the posts guys. Whats mm&ff by the way? Sweet mustangs

I was just wondering if anyone has attempted a side window c pillar scoop for the 94-98 mustangs. I havn't been able to find any online so I was going to fiberglass one. Anyone have any pics or websites maybe?? :nice:

chyea

:nice: thanks a ****load guys. I was buggin out about that. Thinkin I had some 7.5" rear.

I have a 95 mustang gts and was wondering what type of rear end is in it. I know that the gt came with a 8.8" posi rear end, but when I spin the wheels only one wheel spins. Does this meen I have the 7.5" v6 rear end or it that just how the rear end is geard? Please help

just wanted to know how to wire up my autometer tach with my stock instrument cluster. what wires go where. Please help