Search results

So I removed my starter after starting it up again to see what type of noise it was, and when I removed it, I found that the flywheel had some teeth damage. It seems that something is hitting the flywheel and causing it to grind. I will be looking into the engine backing plate, as well as...

I used the torque converter that came with donor transmission. As far the spacer plate not seated properly, how could that be, if the tranny bolts right up to the back of the engine and the spacer plate is right in between????:shrug:

Hello to all fellow stang owners and fanatics. I recently cracked my C4 trans on my 66. I managed to pick up a used but running C4 from a friend. The tranny like I stated had not been giving him no problems whatsoever. When I finished the install, I went to turn the car on and notice a high...

Thanks, I'm going to look into other things before actually trying to take the tranny off again.

Im going to look into that, I was actually thinking it could have been the starter, but it makes the noise even when its running, so I crossed that out right away. Thanks though!

I can't reuse the old trans, it has a shot brg in the tail. This would cause a serious vibration and also clunks when put into reverse or even drive. Driveshaft, u-joints and rearend all re-done, before moving into the tranny. Come to find out the tail shaft spline was way to loose, might have...

Hello to all fellow mustang owners and fanatics. I am new to this forum, and I have a question about my 66 GT Stang. I recently cracked my bellhousing on my old C4 tranny. I was able to find a used, but working condition C4 transmission. I put it on and fired her up and a I came across a high...