Search results

  1. fastangboi

    Cluster comes on delayed after testing Trac Ctrl

    The lights im referring to are the lower indicator lights on the cluster. Most of them have just quit coming on. The delay is coming from the needles themselves. The dimmer switch still works fine. And the traction control is always on.
  2. fastangboi

    Cluster comes on delayed after testing Trac Ctrl

    I was testing voltage going to and from my traction control switch and it popped the interior lights fuse. Then when I got a new fuse in my instrument cluster comes on delayed. I replaced the GEM next to the fuse board on the drivers side kick panel. That wasn't it. My only "guess" at this...
  3. fastangboi

    front suspension problem

    Another Mustang owner told me she was having the same problem i was with my 2000 Mustang. While backing up and cutting the wheel in either direction the front suspention gives a feeling that its running over small bumps. if that makes any sense. Now i thought it was because i was lowered but...
  4. fastangboi

    Mach 460 cd player

    I have a 2000 gt and my M460 unit has the seperate reciever and cd player. i upgraded the head unit and am not sure what to do with the stock single cd player. i cant find any cubby compartments or block off plates. if they do exist can someone direct me. Thanks
  5. fastangboi

    Nitrous 4.6

    yeah Zex isnt too reliable. its a decent 75hp entry level kit for fairly stock vehicles. its the kind of kit that is just enough to say you have nitrous. id go with more reliable equipment if i were you
  6. fastangboi

    How To: Change Your Cluster to Blue L.E.D.s/Incandescent bulbs for $8

    nice. i was thinking the odo would be more trouble seeings how its like a calculator screen. im wondering if a computer repair place could do a good job soldering the radio lights in?
  7. fastangboi

    cobra brake write-up...?

    its so easy it doesnt need a write up. the Cobra brakes are simpler in design than the stock gt stuff. just remove the gt bracket and throw on the Cobra stuff with the new bracket. old bracket bolts will still work. did my swap in under 2 hours by myself. im talking bled and back on the ground.
  8. fastangboi

    The Ultimate 4.6 Noob Thread

    j-mod, definately. gears, FTW. a tuner will be a good start. you will get to bump your shift points and play with timing and fuel mix. long tubes are good for 2-3 10ths.
  9. fastangboi

    How To: Change Your Cluster to Blue L.E.D.s/Incandescent bulbs for $8

    can anything be done with the stock head unit in a 2000 and the green odometer???
  10. fastangboi

    87-93 chin spoiler?

    if you are trying to get a flush look like the 99-04 Mach chin a trick 94-98 guys are doing is using wheather striping. Think of the rubber ground scraper on the bottom of some doors that reaches down like an inch and a half, or so. the parts can be bought from Home Depot or Lowes. as jerry...
  11. fastangboi

    tried and true rear suspention

    alright before i dedicate any money into the rear suspention, what is the ideal drag set up for the rear on an 89? not that 1989 matters just letting you know what its on. ive heard 50/50 shocks and 4 banger springs. i should mention that i already have BBK Gripp upper and lowers, and i...
  12. fastangboi

    e303 question

    i dropped mine in with no tune and she ran like a beast.
  13. fastangboi

    EFI to Carb trade off

    i also think once im carbed i can trade alot better. there are many Ford guys letting good stuff collect dust, like bigger carbs and intake manifolds. plus i like the simplicity of it all. and its lighter than the bulky HO manifold
  14. fastangboi

    EFI to Carb trade off

    i am shooting for max power and to be able to tune on the fly, easily.
  15. fastangboi

    Highest flowing 5.0/5.8 head?

    well.......i just want to see where the horsepower roof is on a 5.0 without spraying or pushing pounds. not really for application purposes but really for ball park figures. right now im still running E7's, E303, 1.7 roller rockers so im doing my window shopping way in advance
  16. fastangboi

    EFI to Carb trade off

    i see alot of carb guys with high hp. i mean i see both, but it seems that the carb guys are a bigger crowd. parts are cheaper and lighter and more simple
  17. fastangboi

    Highest flowing 5.0/5.8 head?

    just so i can set a roof of expected n/a performance. Who makes the baddest high flow heads for the 302. A buddy of mine has some Trick Flow twisted wedge and those look insanely mean.
  18. fastangboi

    EFI to Carb trade off

    no im doing this on my 89gt. and its a pitb to tune the EFI without a programer. also i think its easier to upgrade a carb set up as opposed to an EFI