Search results

I recommend removing spring pads too I removed the spring pads as well and gained about additional drop of 3/8 all the way around. Not alot, but if you are going to be in there anyway, good idea. Plus, it is VERY hard to get the front "hose" type pad to fit "exactly" where it was prior to...

think you have 4 lugs. right? I had an '85 GT (believe it or not for over 20 years!) and had a H-E-double hockey sticks of a time finding wheels for it. I had two problems. The biggest one was the offset. It was about 22 mm (approx. 1" positive) and the much more standard offset is about 45...

what year is your car? Hey jmd. I have an '02 Saleen with 275/40/18 (9" rim) up front and 295/35/18 (10" rim) rear. For fun, I mounted the rear wheel up front just to see if it would fit, and IT DID! I didn't drive it but turned wheel both extremes and did not rub. I am running Goodyear F1...

your right I wasn't just suggesting to arbitrarily raise or lower the car at whim (although it looks like that now that I re-read what I wrote :doh: ) I am just making note that the car can be easily set to desired hight and the spring rate is un-affected. My car is going to be set-up by...

bottom is padded, but has space underneath Hey Jeff. I ran a 2x4 side to side across the car. I wanted the 5/8" plywood bottom to be the same level as the trunk. The back is easily removeable from the trunk (two bolts by hand) and can support hundreds of LBS on seat or back. As for the...

I am in Novato Hi jdm. I understand the cost issue but you don't have to get the whole kit. You can do just the coil over springs. This would probably be better than springs you are considering. And as an added bonus, you can adjust the ride at any time via adjustment on shock. This will lower...

you can remove the seatbelts too, heres mine I made my own rear seat delete kit last month. I decided to take out the seat belts too. I have since put some nice black plastic pieces to fill the holes the belts came through on the roof.

Rear seat delete kits here you go.... http://www.rearseatdelete.com/ :nice:

suspension question hey jmd. I am taking my '02 Saleen to Griggs Racing at Infineon this weekend. I am going for the rear portion of the GR-40 suspension package including the sub-frame connectors. I HIGHLY recommend you check it out. If you want your Mustang to hold the road, this is the way...