Search results

How Much?

Very good condition set of 16" Pony wheels with 95% front tires and about 50% Nitto DR's on the rear. Located just South of Louisville Kentucky. I can meet in a reasonable distance if the price is right. Let me know if you have any questions. $400 OBO Thanks...

The NSS is already jumped and if you use the auto computer you dont have to run a harness. Is the starter connected correct? The only thing I have hooked up to my tranny is the reverse lights. Your switch on your pedals may be bad if you hooked it up.

Also don't forget about moving the speedo cable over the the hole next to it (towards the center of the car). Its easy to do, I did mine with very little trouble, the hardest parts was removing the exhuast bolts on the headers (they broke). Drop your coulum down to put the pedals in, much...

I just put a new top on my car and I have begun installing the weather stripping for the top and pillards. Has anyone had any problem with the 50resto stuff not fitting right in the grooves. It seems that it is to small. Did anyone use a glue of sometype? Thanks for the input!

After I run my 89 a small amount of coolant will leak out from a hole under the heater core connections. I see it coming out and its about 9 inches or so below the heat core connection. What would this be? Is it some type of over flow. I know I don't have to much coolant. It only leaks about...

Yea, I have that one but I was just looking a little deeper. I was just wanting to be forsure. Thanks,

I would rather take a saturday and sunday and work on it rather than spend $500. I like to try everything jusr once. Someone said they had a 19 page one. Anyone know?

Ok, Ive searched all over on here and on ebay and I can't find the big 30 page or so instructions for a convertible top install. Could anyone lead me in the right place. Thank you, Ed [email protected]

I have done some research and I can not find a clear anwser. I am swapping to a manual from an AOD in my 1989. The T5 has a back up light wire and another plug... what does this plug do? There is only one plug under the car which is the backup. Thanks Edward

On the red interior GT's (1989) with the two tone dashes, is it black or is it a Charcoal Gray color. I am looking to accent that color with door panel carpet. I can not tell if mines faded or if its not black. Thanks!

Thanks guys, I was on the same thought path too. Valve covers is cheap compared to the labor to fix a valve. Thanks

Ok, I'm near completion of my "first" re-build. (302, heads, cam, Roller Rockers, ETC). When you all re-assembled your engines did you leave off the valve covers (not sealing them) until you had the engine in the car and running. Or did you seal them before. Reasoning for the question I'm...

50resto.com or Latemodelrestoration.com same place. I saw it there the other day.

With the F303 cam you will need to go with 1.6RR and higher lift springs. Stock springs are .500 lift and the cam is above that.

If that will work than thats and noting else is differant than that sounds good. I already have the heads on Roller Rockers, intake upper and lower and just about everything. Thanks guys

I was looking at the exhuast and intake valves and all that and it looks right. The only diffrenace I can see is that the smog ports are now on the front instead of the back. So everything should work ok engine and head wise. The accesaries will need diffrent bolt I take it? Correct...

Ok this is one of those moments where I might be over anyalizing. I bought a 302 with stock E7 heads. I had the heads ported and went to re-install them. Are heads directional? I'm not running the smog equipment so then does it matter if the ports are on the front or the back? It will...