Search results

  1. S

    posi rear end

    Not to be rude but why do you want posi? You don't have enough power to spin one wheel let alone both. 2.3's with auto's are rather enemic. You would be better off spending money on power. When you get to the point where you keep sending the one wheel up in smoke at will, then get posi. I have a...
  2. S

    SVT five spoke wheels?

    I made spacers out of box tubing. Pictures are on allfordmustangs under this name. It took 30 minutes with a hole saw and 4 1/2" grinder and a torch and welder.
  3. S

    SVT five spoke wheels?

    17 " wheels It would be hard to put a 17X9 rim on the MII. I have 17X8 in the rear with 0 offset. The tire is 225X45R17. It rubs on the rear of the fender where it folds under severly lightly when cornering. I have rolled the fender lips as much as possible. I have +35 mm offset on the front...
  4. S

    Custom parts for MII's?

    I'm not sure what your point is. I have 80/100 bulbs in my MII. I put in two relays, one for low beams and one for high beams. Came off the solenoid for power and used the stock wires to trigger the relays. I deleted the turn signals from the grill and put small motorcycle turn signals under the...
  5. S

    got a 5 speed but

    I downloaded a PDF file of a manual to rebuild the T5 from the internet some time ago. I could email it to you if you give me your edress. 74 pages with lots of illustrations.
  6. S

    2" Drop spindles

    Drop spindles I bough a set of drop spindles off of Ebay for something around $150 and they claimed they were forged. I couldn't tell by looking at them. They have been on the car for over a year. Its a daily driver and I haven't had any problems. It's a four banger car, with 17" wheels and...
  7. S

    what seats fit?

    If you want to sit low, pay attention to width. MII are very narrow between door sill and tunnel. I tried a set of Honda prelude seats but they were too wide. Recaro's are pretty narrow and you can find them in several production cars, VW Jetta's, BMW's, some Pontiac Firebirds etc. They are...
  8. S

    Mustang II Member's rides

    1/2 Cobra Here is the engine and interior as they are now.
  9. S

    Mustang II Member's rides

    MY 1/2 Cobra Here is my Mustang II. I have lowered it, 1" front and 3/4" rear sway bars, 17X8 bullitt wheels. Changed the 6 3/4" rear to an 8" rear with 3.55 gears. T5 trans with Hurst short shifter and lightened flywheel. Made a 4" shifter extension to put the shifter in the stock location. It...
  10. S

    My 2.3L N/A Project

    Go for it I have a 75 hatchback with a 2.3 that I have done a little work to. I didn't want to swap a different motor or turbo either (have other cars that fill that need.) So far I have swapped in a T5 for the C3 auto. Changed the rear end to an 8" with 3.55's. Header and Dellorot sidedrafts...