Search results

Sounds realistic, we'll see I guess

I should specify what kind of E/Ts and traps (mainly care about traps) that I could expect with this car? And no it's not getting longtubes or stupid :poo: like that, it passes smog currently here in CA and that's a rare thing for modded mustangs for sale....

99GT 2v vortech S-trim with powercooler (air to water intercooler), crower cams (something like 570 lift, 224ish duration), X-pipe with I believe high flow cats and short tube headers. I'm looking at buying this car, it feels real strong in 2nd (1st it just spins) but for some reason 3rd and...

For TKO or TR-3550 transmissions (same as used in cobras). Had a small crack that was professionally welded. Is ready to bolt on. $100 obo $200 new from summit: Ford Racing M-6392-R58 - Ford Racing Bellhousings - Overview - SummitRacing.com

For TKO or TR-3550 transmissions (same as used in cobras). Had a small crack that was professionally welded. Is ready to bolt on. $100 obo $200 new from summit: Ford Racing M-6392-R58 - Ford Racing Bellhousings - Overview - SummitRacing.com

Boy you have alot to learn... A. you don't stop pulls at 4k RPM, if it's vibrating THAT bad that the dyno guy doesn't want to go higher you need to fix some **** B. 14.7 is no where NEAR ideal for WOT in ANY spark ignition setup, add more fuel you're WAY lean. Aim for bottom 13s...

wrong

Bringing this one back from the dead, we're getting ready to rebuild the trans and put this all together. So it sounds like pretty much everything will bolt in except that I need a fox fork for the fox body bellhousing. A side question on the fox bellhousing, will the stock 94-95 flywheel...

Thanks that's helpful, however it doesn't have the transmission to bellhousing specs.

Need torque specs for: Flywheel bolts Pressure plate bolts Bellhousing to engine bolts Tranny to Bellhousing bolts and anything else I might be forgetting, thanks

ahhhhhhhhhhhh!!! :crazy:

I know next to nothing about these cars, found an 84 SVO for sale in decent condition. Wanted to know general stuffs about them, how quick are they stock? What is the stock turbo capable of, and stock engine internals? Did they use a blow-thru on the 84s? Thought EFI wasn't until 85-86...

Have a tremec 3550 I need rebuilt for my 95, anyone know of any good rebuild shops in So-Cal or any places I can purchase general rebuild and hard parts from?

don't..... really know what you mean... bolt it on, plug it in... done :shrug:.

ya it does :D, a bad TPS (reading high) will cause the IAC to open more through the throttle follower function... Listen to HISSIN though you likely have a vacuum leak, there's some hoses under the upper intake plenum too... start looking for vacuum leaks...

where u live? Maybe someone can come over and help you out:)

oof, if you're boosted it's definitely time for studs, these motors notoriously lift the heads

You need... to stop working on your car :nonono: How were you "plugging" a water jacket hole with a bolt? It's a god damn pipe thread hole :rolleyes:. Can you get a picture of this I gotta see...

this coming from a guy that tried to put his EGR valve on with the hose still connected:rolleyes:

:nonono: