Search results

anyone have any other useful information on this?

well the only parts that would need alot of attention are my side skirts my rear bumper is brand new and it came in black primer,and im gonna buy a new fromt bumper mine is busted and has alot of layers of paint peeling off it where someone tried to touch it up with spray paint.so the new...

just the jambs im gonna use a gun to paint the car,i would never paint the whole thing with spray can paint.

so there is no special type of paint or adhesion promoter or anything for it,i was always under the assumption the paint would chip off when the plastic flexed.im struck between a cuople things on painting my car,its mostly white right now,it has a blue hatch on it and the passenger 1/4 panel...

i work with alot of people that know about body work and my dad knows how to paint and everything but my question that im wandering about is the plastic parts on my car,such as the bumpers and the side skirts,is there any special paint or attention to be given to them or do i just paint them as...

seat and interior questions im wandering if anyone has ever put vert sn95 seats in a hatchback,i have a brand new set and i have the fronts installed in my 89 but the backs would need side fillers on top and bottom.i am wanting to use the ones i have seeing how they are free and brand new,but i...

just buy u some convertible motor mounts,they are easier to put in and less of a hassle,i think they may lower the engine like 1/2 inch but thats it,they are easier to bolt up then the ones u have.

i just went thro the same thing with my bbk t/b and i ended up welding the shaft on the bottom where it attaches to the linkage,the shaft had became loose and would allow the butterfly to move enough to up my idle to about 1500,if u hold the butterfly closed and move the linkage u will see on...

the car is not obd-II,96 and up are obd-II my wife has a 95gt and it has the plug under the dash but it was never hooked up from the factory,the test plug u need is on the pssenger side fender close to the a/c stuff on the firewall.u can buy tester after tester for the obd-II and it will never...

yea it efi,when i do the cylinder balance test with the ecm,it always passes,it doesnt miss alot at rpm's it does at idle,and it gets bad somtimes like its trying to die.could it be my stator in my dizzy?the old motor missed on the passenger side,the new one is on the passenger side,or it seems...

ttt

anyone?

bump....

i have tried that and it doesnt help,the miss isnt a bad miss but u can feel it,if u unplug it then its a dead miss,the miss is not constant,my plugs have like 300 miles on them,i have checked compression all at about 150,the only thing that isnt new is my coil,i think its the stock coil.

i have a new motor in my car its a 306 and i have a miss in it that i cant fix,i have put new ignition stuff,wires,etc,new injectors,i checked my vacuum its at about 18-19 at idle.i hvae no codes other than somtimes 41 and 91,and i have ran the cylinder balance test and it always passes it...

i need help,i tried to pull the codes on my car and it wouldnt do anything,so i tried to start the car and it wont start now and u can unplug the computer and it will try to start and u plug it back up and it will run but then it will die,the tps has no volts to it and i unplugged the maf when...

anyone else have any ideas

i put a new motor in my car everything is stock except for i have an edelbrock performer rpm intake and a 70mm t/b and better headers,and i cant get it to idle at 900 it wants to idle at like 1500 then when u hit the gas it goes down.and it also seems to hesitate when u hit the gas,but it doesnt...

can some one tell me wut this computer fits,the guy said it was a cobra.the number is f4zf-12a650-jb and the top says j4j1,would this work in a 95gt 5 speed?

my wife got a new car the other day and they guy had put a 5 speed in it and it still has the automatic computer in it,wut all does the computer control.do i need to get a 5 speed computer.its a 95 gt