Search results

Anyone?

Anybody else know how they fit?

I am looking to buy some GT wheels off a 2016 Mustang to put on my 05 and just seeing if they will fit properly?

Does anybody have any insight on the 6 speed manual issues? Not sure if it is real or not.

Anyone?

I am looking at buying my first 5.0 Mustang and found a clean 6 speed 2011 GT with the brembo package with only 49k miles on it. The car is super clean and seems to drive great. I would be getting the car for $15,000. My questions for the experts are... Do these cars and this model have any...

Hey guys just bought an 05 GT that came with a tuner and am just trying to figure a few things out. How can I tell what octane gas to be running in it with the current tune? Also can I turn the rear o2 sensors off myself and not affect anything else on the tune? The car runs great and do not...

It is not on my Mustang but I just bought a super nice 99 Toyota Tacoma TRD with about 110k on it. It is white and I noticed the clear coat is just a little faded and the paint has dirt in it. It is a little worse on the hood and roof with a few oxidation marks on the roof. It just looks like...

I did the test because I got bored and wanted to see what it read. I just bought the car and am not sure if it uses that much oil. It was about a quart low when I got it with 3k on the oil. The engine does not smoke at all from what I have seen. I think my first test numbers are correct. How...

Are these numbers too low? Should I be concerned about that one cylinder?

I did have all the plugs out and the throttle open and added a teaspoon of oil. I drove the car around to clear out all the oil and while it was still warm with just taking the number 6 plug out it read 120 again. Does that seem too low with the others reading right at 150 psi.

Update did the compression test on a cold engine and they all the plugs were out at once and here is what I came up with on just the drivers side. 5 150 6 120 but not sure it was screwed ina ll the way 7 150 8 160 Then I added oil to each cylinder at a time and just wanted to see what the...

I do not have a haynes manual can anyone tell me which one is the fuse for the fuel pump. Thanks guys.

where is the fuel pump relay located? That is a good idea.

Yea I tried doing it real quickly with 2 plugs out and the car fired up briefly and then I cut it off under a second. Can anyone tell me what I need to do to disable the systems? I have all 4 plugs out on the drivers side now, will that be acceptable?

I am about to do a compression test on the drivers side head and was wondering if I need to disconnect a starter selenoid or just take all the plugs out and crank it over? Also what numbers should I expect for a stock basically 99 GT?

I am looking at buying some factory 05 wheels to throw on my 99 GT and need to know if they will fit. thanks

A few of your plugs had some oil on the threads too? I just bought the car and it runs great and am fanatical about taking care of my stuff. The car runs great and fires right up and does not struggle to start like it had low compression. I was just wondering if anyone else had experienced oil...

These plugs were very old, should I just drive a little bit around and recheck this cylinder and see if there is any oil on the threads? What is weird is there is no oil on the electrode, but there is oil on the threads.