Search results

Sounds like you hit the nail right on the head. I had a hunch that was it, just needed some feedback. I really appreciate your support. Thank you and have a nice day. Aloha, Tommy.

There is an internal noise that is coming from my sons 2003 GT Mustang 4.6 engine that may be coming from somewhere with in his timing chain assembly. I removed the outer drive belt to see if the sound was coming from any of outer pulleys. I then started the engine and the sound was still...

I just replaced my sons 2003 GT Mustang 4.6 two power steering line seals at the rack and pinion gear box for the second time in less than a year. The connection appears to be a bad design. With the proper tension placed on the fittings to the rack housing, the design of the connection still...

Well, my son is having problems with his ac right now, and I just thought if the problem ends up being the CCRM, perhaps it would be a good idea to relocate it to the engine compartment in case it gives problems in the future. As of right now, I'm just looking for feedback like yours. I...

Has anyone relocated their CCRM from under the right side fender well to the engine compartment? Why did Ford place it there? Is it because of the engine heat, or because they wanted an excuse to charge you more for repairs. I'm thinking of relocating it to the area marked by the blue box in...

Very Good! This is what I wanted to know. Now I know what I need to get. Thank you very much for your outstanding support.

Is this the strut bump stop for a 2003 GT Mustang? I understand how everything mounts and bolts above the strut mounting plate. What I'm trying to find out is what mounts below the strut mounting plate. Please remember I'm piece mealing this assembly from parts I purchased on Ebay. It...

Ok, here are the parts I was able to get from Ebay. Looks like part (D) is already installed on the strut mounting plate like you said. What appears to be missing is the item you refer to as the bump stop. You are saying that part (C) slides down onto the strut shaft first, then the bump stop...

This is a strut mounting kit for a 2003 GT Mustang with a 4.6 engine. Does anyone know how parts (C) and (D) mount? I'm thinking that part (D) bottoms out on the strut shaft just the way it is positioned in the picture, then part (C) sits on top of it just as it is shown in the picture, then...

Here's what you need, or can use! If your fuel rail does not have a schrader valve, another option would be to use this adaptor kit. It plugs into your fuel pressure sensor slot on your fuel rail, then your fuel pressure sensor, and the gauge that comes with the adaptor, plugs into this new...

Here is the gas tank removal instructions. You will have to purchase a new rubber grommet for your gas filler tube as documented in the removal instructions. Good luck, Tommy. http://www.paladinmicro.com/documents/2003GTFuelTank.pdf

Here is the gas tank removal instructions. Be sure to scroll all the way down when viewing the page. Good luck, Tommy. http://www.paladinmicro.com/documents/2003GTFuelTank.pdf

They finally made an adaptor kit that allows you to bolt a PI Intake to your Non-PI heads. It must have just hit the market because I have been looking for a long time and have not seen it. Everything needed to make the swap comes with the kit, including the intake manifold. Check it out! Good...

Alan, thanks for the good words. Glad to be of some help. I knew you would get that engine going. It was just a matter of time! Good job and good luck with all your porjects, Tommy.

Does anyone have the EEC Pin Out for a 1996 Lincoln MK8 engine? Thanks for your help, Tommy.

This is what the sensor looks like! This is what the sensor looks like. Driver side rear of engine near the firewall. Good luck, Tommy.

Intake coolant leak! I hate to be the one to give you the bad news, but, you will need to have your intake manifold replaced. The 1st picture below is from my sons intake, the 2nd picture is from another person from one of the forums. Both of our intakes, and hundreds of others, including...

Check out these pictures! Check out the pictures at this Ebay item number: 120440322187 Very good pictures maybe it will help, Tommy.

Power steering brackets? It may be hard to see, however, the two small brackets that you are trying to identify may be the ones located inside the red circled area. I looked at several pictures and this is the first one that I found, which shows brackets similar to yours in the back of what...

Nice picture of the motors front end for a 2000 & up GT... Here is a good picture that should clear up some of your problems. Hope this helps. Good luck, Tommy.