Search results

Thanks guys ,found em , not under the seat . There are two on the wheel well.Any other input if this isn't the problem?

My son has a 93 lx came in this morning said car had run out of gas. We put about 4 gallons in and now when we turn the key the pump will not prime no sound coming from it at all car cranks strong but seems like no fuel . opened the little fuel line valve while he cranked and got no fuel at...

Any body have a step by step for timing cover removal? We cracked the water pump flange trying to remove broken studs. So now small job turns big. I know we have to loosen the oil pan in front, is there a gasket that just fits the front of the pan or do we have to drop the whole pan and change...

I have UMI rear lower and upper control arms . Very happy with them so far.

Marc, Great time with stock rubber,congrats.

the nats Charles was that the track at the nats this year? Its me First ford [Rick]. Just put blowers and stickeys on those bullitts and get em into the 12s and 11s.

Standard gt crank has 6 bolts. Get your own parts and find a good shop to do install .Should cost about $400 for labor. Depending on what you buy parts will run around $700 for a decent set up.

With the car or the GF?

You can get a set of bullitt type gt take offs with tires [mt et streets] for $650 complete from Brenspeed. Wheels are factory take offs with less then 1 mile on them,tires are brand new of course. Wheels are 17" tires are 10.5 x 26 and fit the wheels perfectly. They come unmounted ,about 20 per...

5.0 that is gonna be one mean machine. Pictures when and if you do the water/methanol mod . Very interested in the out come of this .

interesting ,indeed.

You gonna do the internals? Sounds like your going to be pounding quite a bit of power through that engine. As it stands you've got at least 425 to 430 rwhp now I would think. You will be pushing the envelope of the internals with much more.

5.0 , Boy does that set up look familiar. Looks like under my hood except for the seperator mine is a bit different. Non-intercooled? any plans for intercooler down the road? I've been thinking about installing the intercooler next summer got to save some money for that over the winter.Happy...

Brian, I never said it was junk. The only point I was trying to make was that for a relitivly small investment compared to the cost of the car, a person that is not as mechcanicaly inclined as yourself can insure that they are getting the right set up that will bolt right on very easily and most...

No logo on the unit , comes flow tested for the cfm specs of the car it is made for with mounting [custom for where you want to mount it] bracket,hoses, clamps and hardware. A line dryer for a air compressor is made to take water from compressed air ,this is not a HD or Husky water filter .Not...

call bret at bku motorsports he will design a oil seperator for your car cost about $50.Bench tested to your cars specs.Or go to home depot and put a seperator made for an air compressor on your $30,000 investment.

I would run as fast as I could from the original installer.You say he also tuned your car?Be vary wary of any work he did.

Have heard them on some of my club members Bullitts, they sound great.

Maybe I don't get it but would'nt it be cheaper just to change the rods and pistons in the stock block? I thought our blocks could take quite a bit of hp, up to about 800 or so and that the rods were the weak link?

Go to ZampOutlet.com - Marketplace for Zamp Auto and Motorcycle Racing Helmets .click on open face helmets "j1" they run from 69 bucks to 50 bucks . I run the $50 green helmet at englishtown my car runs in the mid 12s. no problem with this helmet "m2005"snell.Happy racing