Search results

  1. evolucion311

    '03 Gt Issues, Please Help!

    If you have an oil light or low pressure indication even from a dummy gauge then WALK. Don't drive that car anywhere! You need to verify you actually have oil pressure with an external gauge. You can let the car run for 2-3 seconds for testing but no more.
  2. evolucion311

    Nightmare P0306 To A P0300 Code

    I had similar symptoms and ran through all of the electrical tests (which you should) and ended up diagnosing a cylinder 2 exhaust valve seal leak which was allowing oil to coke up carbon on the valve seat, thereby preventing full compression on that cylinder and throwing the engine out of...
  3. evolucion311

    96 Gt Won't Turn Over.

    Before you throw parts at your problem may I suggest you check the connections for the power and ground wires to your starter? Your car isn't dying while running, right? This makes me think that even if your battery is bad that your alternator provides enough juice to keep the car running...
  4. evolucion311

    Fried Fusable Link- Now Issues With Abs

    Can you pull any ABS codes? Search my username on YouTube and you'll find a video I did on replacing the ABS module without having to replace the hydraulic unit or remove the brake lines. As WMBurns said, verify power and electrical integrity and if your scan tool can't communicate with the...
  5. evolucion311

    Electrical Pinout Test Blues And Tips For Noobs

    If you do PCM work and then get both ABS and SES lights, make sure to check the 3 wiring harness connectors by the PCM because they have retaining clips that don't seat quite as well after they have been removed a few times. One of mine wiggled loose while driving and threw an ABS light for...
  6. evolucion311

    Electrical Pinout Test Blues And Tips For Noobs

    Well crap now my ABS light is on.
  7. evolucion311

    Electrical Pinout Test Blues And Tips For Noobs

    First, let me say thanks for WMBurns for all he does for the community. This post is a warning/heads up for new guys running pinout tests on their PCM/ECM. See those three connectors (2 gray, 1 black) above of the PCM? Yeah, they need to be plugged in to each other when the factory manual...
  8. evolucion311

    Project "true Blues"

    All GTs came with ABS. Not sure about TC but I am confident they all have antilock brakes.
  9. evolucion311

    Misfire During Warm-up Followed By Bluish Smoke After Idle

    My initial theory: You have a cracked intake manifold with a hairline fracture that only allows the coolant to leak once the temperature and pressure rise enough. This coolant is fouling your COP(s) and causing the cylinders in question to misfire. No spark = no burned fuel = smell of gas...
  10. evolucion311

    Help Me Get A Nut! 2004 Mustang Gt

    You have to torque the living :poo: out of control arm bolts.
  11. evolucion311

    Check Engine Light Blinking While Driving???? Need Help!!

    I have experienced this problem exactly. Use your programmer to read your codes. Misfire code maybe? Mine ended up being a burned exhaust valve on cylinder #2. I'll be monitoring this thread. It'll be a good run. Your misfire is dumping raw fuel/air into the exhaust and could destroy your...
  12. evolucion311

    front end squeak when turning wheel - rack and pinion?

    I had a similar problem and mine turned out to be the strut mounting bushings under the caster camber plates. Replaced old worn out rubber with polyurethane and was good to go.
  13. evolucion311

    Possible C.o.p. Problem

    A second thought.... why are you running iridium plugs? Unless you've got a good reason not to (like nitrous, supercharger, etc) you should be using plain-jane Motorcraft platinum plugs. Replace with OEM plugs and COP boots, reset computer, try again. Rock auto dot com has great prices on...
  14. evolucion311

    Possible C.o.p. Problem

    Let me know if you need a set of COPs. I replaced all of mine chasing a misfire that ended up being a burned exhaust valve. I've got like 10 of them. They are just laying around and I can help you out for a LOT less than new.
  15. evolucion311

    Slow Leak From Coolant / Heater Hose, O-ring Size?

    Hey all, My 02 GT has a very slow leak from the heater hose where it mates with the fitting on the passenger side of the firewall. The hose that is on there now is a used hose I pulled off a donor parts car. I believe the O-rings inside the hose fitting are worn and I'd like to replace...
  16. evolucion311

    18's on a lowered Mustang

    I have an 02 GT convertible with 18" staggered saleens and an eibach pro kit w/ poly isolators. If I had to do it again I would go without the iso's.
  17. evolucion311

    piggyback underdrive pulleys

    +1 on Steeda. 40k miles on mine no problems. Do it right or don't bother.
  18. evolucion311

    apparently I'm gay for buying a v6

    Ummm... he was right. V6's are a joke and a waste of steel.
  19. evolucion311

    Help diagnose crank but no start condition....Fuel Pump or FPDM ?

    DD pinout test in PDF format: http://depositfiles.com/files/kifib00p4\ if you have an iPhone 4 or iPad I can walk you thru the test via FaceTime or video chat