Search results

I'll rebuild it myself, I don't know what I'm doing but I heard about a couple of rebuild videos. At a decent tranny shop here it's going to be at least $800 for labour and a rebuild kit - not including any synchro assemblies. I want to make more power eventually but time/money are issues...

So my car has trouble shifting from 1st to 2nd gear. When I put it in 2nd and then apply gas it sometimes pops out of gear and into neutral. Leads me to believe its a synchro issue or worn gear. My question is, rebuild or buy a different better transmission? Obviously money is a concern so I'm...

I've got some really loose steering in the center of the wheel which I am pretty sure is the rag joint. Are there any modifications that can eliminate this problem? I know its fairly common. Is there a metal block that can go in there or possibly some stronger rubber? Thanks

Thanks Cobra259 I kind of figured that it had to be strong enough to support the factory hood latch if they sell it like that. I've seen a lot of mustangs in the magazines without hood pins but different hoods too. It just made me worried because I have read on some forums that people say...

I am currently looking at re-painting my mustang (95 convertible GT) but I was thinking of replacing the hood at the same time. I was thinking of getting the Cervini heat extractor hood - similar to the Saleen S351. I may possibly put a 351 windsor in at some point so that should give me the...

That's always a possibility. The sun down there is harsh. When I use the compound it shines good. The claybar makes it very smooth. How do I tell if the clear coat is gone?

I've got a 95 stang, new to me, but it was a south Flordia car. The body is in great shape, but the paint, not so much. It looks as though its got a lot of oxidization build-up on the paint. There is a lot of grime too that won't come off with a regular washing. I tried the claybar...

So I was bleeding the hydraulic lines for the convertible system because I had some air in the lines. As I go to raise the roof everything is working fine but I hear this loud snap. I look over to the passenger side and a piece of the frame is dangling down. The piece that is broken is...

Do you have a bad connection with your battery? Are the leads clean to get a good connection? How old is the battery? Thats a fishy problem...my guess is its related to the battery and it is a connection, but I really don't have any other ideas.

SOLVED Just for those of you who may ever run into the same problem... In order for the driver's side window to work there is a one touch power down window module that is attached to the driver's side door panel in the bottom corner below the arm rest. That module must be connected in...

Hey guys, Here the scoop...I've taken apart my window motors and rebuilt them since one broke. The whole interior is out so why not? Anyways, I put my driver's side window motor back in and now it doesn't work. The motor works on another 12v connection just not the one its meant to...

Good advice toyman I will see what happens. The mustang, I know what you mean but te plastics were faded from the sun so it didn't look that great

The color on the interior is black and I am just painting it black again. The other duplicolor trim paint I used looks great and applied well. I guess the vinyl one is not the right product. I will try the paint thinner to see if I can remove the crappy stuff. Thanks everyone for the...

Hey guys, I've recently removed the interior of my 95 mustang to re-paint it in hopes of restoring it. Anyways, I am pretty sure I've used the wrong paint. I got Duplicolor Vinyl & Fabric paint and I tried it on the door panel. It turned out to be pretty glossy and the top portion of...

I've heard the flowmaster super 44's I think they are called. They sound amazing but it's just so loud. I've heard the borla's with an x-pipe and they do sound werid but I've heard good things about their quality an engineering/design. Can you get flowmaster or magnaflows in stainless steel?

I am having some problems with my power drivers seat. Unfortunately, it won't move forward. I can't seem to diagnose the problem, so I've been looking at alternatives. Does anybody know what years of mustang seats will fit in a 95 convertible? I was thinking of picking up leather ones from...

Sorry, I forgot to mention that when I do use the switch, it sounds as though the motor engages, but I only hear clicking when I try to move it forward. I can push the seat with some force while engaging the motor and it will move, but it definately doesn't work correctly. Is a gear is...

Hey guys, I have a 95 mustang GT, with the power seat option. On the driver's seat, I can get the seat to move back, up and down, but not forward. I can't seem to figure it out. I have taken out the rack and it appears that its still on the track. I can't really find a way to take apart...

Yeah sorry, I mean the convertible top. It's definately hydraulic but I can't find the reservoir cap/plug to add more fluid.

Call me crazy, but I can't seem to find out where the reservoir is to top up fluid for the top motor. I have a leak either from the connection on the cylinder(top end) or from the brass fitting where the rubber line goes in. I can't really tell. I've tightened up the connection because...