Search results

Balancer has not spun. It looks good. I'm wondering if maybe when the motor was assembled the timing chain is off a tooth.

I had the spout out while timing. Balance looks new. I'm not sure if it has spun or not. I'll have to look at it.

Finally got the codes out of the car. Key on engine off Codes: 85 31 66 13 11 I set the timing at 10* but if you give it any gas it back fires thru the manifold. Runs for crap.

Doesn't light up with the key on. No codes at all. No code 11 or 10. Doesn't flash. Tried it with a test light and the same thing.

Well no codes were able to be pulled from the car. I started it up. It runs better but still seems like something is wrong.

No just another hood I picked up with some parts. Hoping to paint it.

I just installed the computer, BBK MAF sensor for 24#, 24# injectors! trick flow track heat intake setup and the correct ECM in the car. I'm going to see if I can pull codes in a little bit.

Yep. Not sure why but there was a A9P ECM under the passenger seat lol. Few pics

I found another ECM under the passenger seat that is for an auto car. I swapped the computers. I got 24# injectors with the car and my buddy let me borrow before I buy his Trick flow track heat intake. I'm going to install them tomorrow and see if I can find a MAF that's setup for the injectors...

Car I replace the ECM with an automatic car ECM if it's a manual?

Hmm I think this is the problem.

I tried the test light method, it didn't work. I think I'm going to have to look at the ECM. Car was a 4 cyl car. Previous owner said he put a v8 harness in it. He wasn't sure what the ECM came out of.

So I can't seem to figure out why I can't read codes on the car. Seems like the check engine light doesn't come on at all. Even rotating the key when all the lights self test it doesn't light up. A friend is lending me his Maf that is setup for 24lb injectors. I have a set of 24#r's that came...

That's what it was set too. Thanks.

Well that's a problem the. Lol.

What's the firing order supposed to be on a 347? Same as a 351?

Tried to pull codes from the car and didn't get anything. In fact I don't even see the check engine light come on. My friend also has a set of 24# injectors but if have to get a Maf. Sounds like I'll need to go 30# though. Does anyone run e85 in these cars. I'm coming from the GM world here...

Ok I'll pull codes tonight.

Thanks! I just made a post.

Hey guys I just recently picked up a 92 mustang with a 347 stroker. The car runs like crap. I figured it was due to the combination of parts. The guy I got it from seemed like he lost interest and threw parts on it to sell it. 347 stroker F303 Cam Windsor Sr. Heads 80mm throttle body Unknown...