Search results

Yes, you understand correctly toyman. Good thing you did because im really bad at being descriptive. I guess i'll have to see if Ford still has those bolts available without having to buy a 1/2 inch spacer with bolts and not use the spacer due to the new intake rubbing the hood liner. I guess...

Confirmed toyman. Thats how I had it when I stabbed it. Since the gears are funny I kind of had to lead it a little but when it stopped turning when it was in all the way it was pointing at #1 spark plug. I rotated the grey part of the distributor a little not knowing it could do it by accident...

I have the long vacuum line coming off the tree going in on the elbow vacuum adapter hat came off the stock piece. I did use the rubber gasket ends along with a generous bead of rtv on the ends of them.the only cork used are on the valve covers. Could it do with how the distributor was stabbed...

So i just finished my installation on my new gt40 intake and i supect there is a vacuum leak. When the car is in idle its going from 700-1300 rpm, not jumping but climbing and falling slowly. Ihad to take the stock heads off to get them resurfaced but i dont think thats the issue since I took...

So I'm putting the head gaskets on with my stock E7s and I'm looking at my felpro gaskets that I ordered a while back and the cooling jacket ports are not present on the rear side of the gaskets. As you guys know there are water jacket ports on the rear and front of both the heads and block. I...

I'm sure I will swap over to the fox setup one day but the summers are short here in alaska I have about one more week until all the snow is gone and I'm on the road. Bullitt95, how's the throttle response in stop and go traffic? And no offense but 75mm isn't too big?

That that's would have been a site to see. My buddy had offered me a polish on the intake but as nice as it would have been I knew they require a bit of up-keep

Yeah that's a ding there's a few more that have since been smoothed out. I paid about 300 for the upper and lower and have about 350 in parts and labor. It's only expensive since I live in alaska. I had the opportunity to buy one that had never been installed and still bnib but I was out bid on...

What he said. I love my adjustable control arms from MM. Worth it when I feel like having a raked look which is all I can do with them now.

Good riddance, it took me close to 18 hrs to install mine. I was young at the time and now I'll never replace them because they are a huge PITA

So I already made up my mind on sticking with the 94-95 throttle body setup and the size of the throttle body. What I can't decide on is what brand throttle body to get. If I can help it, I try to get American made parts for my car since it is an American made beast. So edelbrock would be my...

So I just got my intake back from my buddy who smoothed out the ports and painted the upper and lower. Needless to say its the sexiest intake I've ever seen. Oh did I mention he custom made the top plate? Your thoughts?

Well that answers that about the intake. Anyone know of any good injectors? I want to keep the stock flow rate of 19#. From what I understand the stockers are good up to 300hp anyway. And if I get 19# injectors would I have to re calibrate anything such as the maf sensor?

Jordan, thanks for the link but it seems to be broken. Is that a link from this site? And before I pick the heads up from the junk yard ill see if they will come down in price any. I knew I would be putting some money in them by just taking them to the machine shop alone. Nothing too fancy I...

First real post so here it goes. First of all I'm getting new injectors and keeping my 19# rate. I'm looking for a good cheap set but all I see really is 360 and up price tags. Any reccomondations? I'm swapping them out bc I live in fairbanks ak and my car is pushing 150,000 miles. Next is I'm...

Hey everyone, ive been on sn95 for a little while and while they're great over there, there are always refrencing someone over here. I have a 94 GT Conv. Mods include: BBK equal length headers, BBK H pipe, flowmasters. MM Sub frames, mm adj LCA, bbk springs, bilstein struts and shocks, eibach...

springs Do you still have these springs? I am intersted but i was wondering the length of the spring. thanks