Search results

I turned on the headlight switch without the car running the multimeter read .64 with low beams and .51 with high beams on

Tried a new switch today no luck still the same thing

ok so the dimensions are the same as the front fender for the rear quarter?

Hey, I have a 88 gt and my high beams are not working. When I turn them on via turn signal switch the headlights actually dim. No issues with low beam. The high beam light on the dash cluster doesn't light up. I have new bulbs, did the fog light mod. That's been done for a while now I...

Hi, I put quarters from a LX on my car. If anyone has there GT side skirts off... Need big favor. Could you measure the holes that the vertical ground effect pop rivets go thru? The smaller brackets. Thanks Justin

Hi, Does anyone know if any Fords fan shrouds interchange with a 88 GT. I got one out a Lincoln with a 5 liter thinking it would fit but it's too big. The local junk yard doesn't have to many mustang 5.0's but a lot of other different Fords. Thanks Justin

Well.... Myself and one of my techs. I'm a service manager at a Mack truck dealership. I'll take the blame.... Just happy found the issue without breaking any thing.

Confirmed head gasket in backwards guess front means front...

Going in for surgery

on another note...Where is the turn signal flasher for a 88? I looked at the fuse panel found the hazard flasher which is missing also. I don't understand that too much. I can't plug a flasher in it and it has two terminal ends plugged in it attached to wiring. I checked behind the glove box...

I was doing some researching on old threads and someone mentioned about the head gasket issue on the first page of this thread. Then I got to thinking my combo isn't really that much over stock and I didn't what so ever have a overheating issue before this rebuild. The PO had a 160 stat in it...

Thanks for the info. I'll try that method on saturday. The e-fan sound like a good fall/winter project. I have a local u-pull-it yard here in PA. that I could go to. I didn't mind the e-fan perfomance wise. I just didn't like the look of it and didn't trust it from all the horror stories I've...

I hope so. Thanks for the reassurance. I'm going to be replacing the gasket saturday morning. I am going to ditch the electric fan.... didn't like it and install a heavy duty fan clutch.

Ok.... I'm a idiot... Right side head gasket on backwards. Found it the other night. I didn't run the car long cause it always overheated. Hope I didn't damage anything. There freshened up gt-40's and new pistons. At least I found it I guess. Thanks, Justin

OK I'll give it another shot tonight

waterpumps good its a motorcraft unit

I don't have a smog pump but have everything else a/c, powersteering, etc. I checked that with the charts online and it seems right.

Myself and the technicians I have at our shop did the rebuild.

I jacked up the car and everything. I did get a small pocket out. I took it out last night and it got up to 210 on a cool night around 70 degrees. I have a flex a lite fan controller on the car went the temperature probe. does that controller have the fan come at 100 percent. I thought I seen...