Search results

  1. A

    Question on -10% fuel on bank 2

    ok, so after looking at the log, the fuel trim evens out under load. the separation starts as the motor RPMs fall. At 3098 RPM the fuel trim is 1 to 1 At 803 RPMs the fuel trim is 1 to 1.19 also the car runs awesome by the way.
  2. A

    Question on -10% fuel on bank 2

    same thing, no change. Throwing code P0443. would this effect fuel trim? Also is my Bank 1 low or on Bank 2 high? ALSO, had no fuel pressure when i pressed the shrader valve with engine cold. ran the car last night.
  3. A

    Question on -10% fuel on bank 2

    just pulled #1 injector and found it a lot of junk in the screen area. I was surprised. New Deka injectors with 250 miles on the them and the build. Gonna data log in a few
  4. A

    Question on -10% fuel on bank 2

    ok, found the fuel smell. I jacked up the driverside and gas was leaking past the grommet at the tank and filler. I will fix that. How do i find if its a dirty injector? could an 02 sensor be bad and NOT throw a code?
  5. A

    Question on -10% fuel on bank 2

    ok, but please let me know what that is. I am unsure what to check.
  6. A

    Question on -10% fuel on bank 2

    Longterm Fuel Bank 1 Min: 1.00 Max: 1.01 Avg: 1.00 Longterm Fuel Bank 2 Min: 1.00 Max: 1.16 Avg: 1.02 Compression on all cylinders - 155-160 I have a strong raw gas smell from passenger rear of the car. Only after running the car and hot. Does not smell inside the car, only outside. New...
  7. A

    Question on -10% fuel on bank 2

    thanks, I did the flash and ran a new log same thing.
  8. A

    Question on -10% fuel on bank 2

    hey, would you mind looking at my log? I can email it to you.
  9. A

    Question on -10% fuel on bank 2

    hey, how do i refresh the computer? pull the negative?
  10. A

    2001 Bullitt Rim Replacement

    yes, easy to replace cap. Ebay for a factory replacement. Probably will be used.
  11. A

    Question on -10% fuel on bank 2

    ahhh. makes sense. thank you
  12. A

    Question on -10% fuel on bank 2

    I don't have a miss now. How is that possible? How long does it take for the car to recognize the miss?
  13. A

    Question on -10% fuel on bank 2

    thank you. COP? Plug? injector? any way to pinpoint the issue?
  14. A

    Question on -10% fuel on bank 2

    awesome thanks. How to reflash? unhook negative? Still puzzled why it did cause the number 5 cylinder miss.
  15. A

    Question on -10% fuel on bank 2

    My log shows -10% fuel on bank 2. I had a misfire on number 5 cylinder. I pulled the plug and it looked dry with carbon deposits. I swapped the COP with number 6. I have no new codes but a slight hesitation when I get on it. I checked compression and I am good. How to I diagnose this...
  16. A

    P0305

    hey thanks. I inspected the suspect COP. the rubber looks ok. is this something you can't visually inspect?
  17. A

    P0305

    I got P0305 misfire. I swapped coils with cylinder 3 and the misfire is not present. What could that mean? The plug look like it had some carbon on the plug but not the diode. Does it take some time for the misfire to come back? plugs are new, coils look to be original 2001. thanks