Search results

  1. 99Blownstang

    Predictions On My Numbers?

    Its a conservative tune and it is almost 100 degrees here and very humid
  2. 99Blownstang

    Predictions On My Numbers?

    I'll post it tomorrow when I go get it
  3. 99Blownstang

    Predictions On My Numbers?

    Well she is done! Since the motor is stroked it only made 9psi on the 12lb pulley. Final numbers for now is 400hp 421tq.
  4. 99Blownstang

    Predictions On My Numbers?

    Talked to my tuner today and I have some good and bad news. Bad news is I'm only making 5psi, hoping its just the bypass not closing all of the way. Good news is at 5 psi it put down 365whp and 390tq
  5. 99Blownstang

    Predictions On My Numbers?

    I'll be finding out on Monday. Going to put different inlet and tb, long tubes, and meth injection on it this winter. But for now I'll have fun with it
  6. 99Blownstang

    Predictions On My Numbers?

    My car is currently at the shop and should be getting put on the dyno tomorrow. What numbers do you think I will be putting down? 1999 mustang gt 4.6 stroked to 4.75 9.5:1 Stock 2v heads and cams 2.1 KB with 12psi 60lb injectors Tr6 plugs KB cold air intake 75mm tb 90mm Maf Stock manifolds w/ x...
  7. 99Blownstang

    Tps Question

    Turns out it was the tune. Hoping he can get it fixed by Saturday morning. Thanks for the help guys
  8. 99Blownstang

    Tps Question

    Cleaned the throttle body and is still doing it. Throttle is not sticking. Any ideas would be helpful
  9. 99Blownstang

    Tps Question

    It doesn't seem to be
  10. 99Blownstang

    Tps Question

    Ok so I finally got the scanner hooked up and here are some of the readings I wrote down. IAC DUTY CYCLE=48% MAF=9.5-9.98(GM/S)1.06-1.1volts IAT=143°F, 1.14volts ECT=192°F O2s11=932mv O2s21=964mv One menu said the fuel rail pressure was 37.6psi and another said it was 57psi What do you think?
  11. 99Blownstang

    Tps Question

    My neighbor is bringing his scanner over this evening. My fuel rails don't have a schrader valve so I'm not sure how to put a pressure tester on it
  12. 99Blownstang

    Tps Question

    Which fuse would blow? I didn't see any blown ones when I checked over them. It has coil on plugs. What do you mean by unplugging all of the wires? Do you mean un plug each coil pack one at a time while its running?
  13. 99Blownstang

    Tps Question

    I had an extra one laying around so I swapped them out and it didn't fix the problem
  14. 99Blownstang

    Tps Question

    Ok thanks I just wanted to make sure that's what it was causing it. Wasn't sure if that would make the rpms hang like that. Apparently none of the parts stores can get it, go figure. I'll call ford in the morning. Thanks for the help
  15. 99Blownstang

    Tps Question

    I'm waiting to borrow my neighbors scanner. The vacuum line coming off of the frps smells like fuel. Does this mean it is bad? If so could it be causing my idle problems?
  16. 99Blownstang

    Tps Question

    The maf value is jumping around quite a bit. One of the times when it wouldn't start I pulled the vacuum line off of the fuel pressure sensor and it started. 4.6 stroked to 4.75, 2.1 KB, 36lb injectors, 255lph pump with boost a pump, 75mm throttle body, 90mm Maf, KB cold air intake, 9.5:1...
  17. 99Blownstang

    Tps Question

    If I give it gas it takes awhile for it to idle back down. Also runs lean at idle and sometimes will crank over and not start
  18. 99Blownstang

    Tps Question

    When I unplug the IAC it dies
  19. 99Blownstang

    Tps Question

    I used 2 cans of it already and haven't came up with anything. I'm going to work on it tonight when I get home from work
  20. 99Blownstang

    Tps Question

    Umm...yeah about that haha