Search results

I'll definitely try that. Do I have to get replacements from ford? Or can I just get the vacuum hoses from Advance or AutoZone?

N No luck so far. People I have asked though just say its normal engine noise but it almost sounds like a backfire that's what has me worried

I've been hearing some grinding in my wheel area recently and I was told my brakes were fine. Well today the noise was especially bad, but when I made a sharp left turn the noise completely went away until I straightened out my wheels. Someone told me that it is definitely my wheel bearing that...

Ok I just took my car (2002 V6) to the auto store with a "whooshing" sound coming from rear end. The mechanic there told me that it is slightly loose and there was nothing to worry about. Anyone else have this problem? And if so, how did you fix it????

Ok, I am looking to replace my gaskets and am wondering if there is anything more to the procedure than I am aware of. Unbolt, pull off slowly, remove old gasket material, apply gasket adhesive, apply gasket, bolt down to factory torque and pattern...

Ok, I purchased a cold air intake from the AmericanMuscle website and installed it with no problems. Now when I start my car it sounds like theres a tornado in the passenger fender. Then when im driving, I randomly hear the intake really loud like its spiratically sucking in massive amounts of...

thanks for the reply. diff not leaking. what does the anti squeal metal look like? and should I oil the slide pins?

Ok I have a weird problem. I have had this chirping noise for quite some time now. It happens after a couple miles of driving. As I gain speed the chirping is faster even when not pressing the brake. ALWAYS THERE! The weird thing is that when I press the brakes the sound completely goes...

ok i have replaced iac, tps. cleaned throttle body and intake air sensor. but still, when i first start my car it idles fine with no roughness, until it idles down then it starts to shake and sputter, then after a few minutes of driving it idles perfectly. also when i first start the car theres...

I just had to get my rear end on my 2002 v6 replaced. I think it was replaced with a 03 or 04 rear end. Now when I drive there is a constant chirping sound coming from the rear end and when I press the brakes, the chirping gets faster and higher pitched.

It may not seem like it but if you look inside its basically a spring a post and a lever that opens and closes to control the amount of air passing through the engine at idle. If it sticks or malfunctions it will add more air than it needs and that in turn causes your car to add more fuel so...

Yes I changed the iac because it threw a malfunction code. The tps is what fixed the problem. Run to advance auto or autozone and have them check or codes. Even though there's no light that doesn't mean there isn't a code. If you can't have it checked try n replace the tps first since its cheaper

Mine turned out to be the TPS.. Still idles a little rough on startup but not at 2500rpm lol

I have changed the TPS and the IAC and still when i first start the car it idles really rough and shakes. I had it hooked upto a vacuum gauge and it read 15 at first for a couple seconds then it jumped to 20/25 and was steady there.

Ok now I have replaced the TPS and it fixed the eratic idle problem. now i have another, when i first start it, it idles really rough and the car shakes. then after like a 2 mile drive its idling perfect

I am having the same exact problem. Try unplugging the IAC while its running and see if the idle goes down. Thats what my mechanic did and he told me that because the idle went down, the IAC was bad. Ordered the part and will receive it on wednesday. ill be sure to repost my results.

I have a 2002 v6 mustang and recently the idle has been jumping to a high of 2500rpm on startup and only idles down to about 1200. I was told it was the IAC so i purchased one but i want to see if anyone else has any info before i install it because once its installed i cannot return it. Also...

Could you post a diagram of where the brake booster line is? Thanks for the advice btw. Theres a lot I wanna do to this car but I just need to get past all the mechanical stuff first. Another question though? is there supposed to be like 3 inches of slack on the throttle cable? Also on another...

I have a 2oo2 mustang V6 and I can tell the engine is getting old. It is starting to slightly lose power and is collecting rust. It has 116000 miles and barely any parts have been replaced from original. I was wondering if I should have it rebuilt or just find a remanufactured engine and have a...

Ok I have a 2002 mustang v6 and was wondering if anyone had the torque info for the intake manifold. Also was wondering if it could be painted?