Search results

  1. B

    Performer 289 Manifold Install Questions

    I’m about to install my 289 performer manifold on my stock 67 c-code and was wondering what length 5/16 bolts I would need. I purchased 5/16 x 2-1/2 bolts and I’ m thinking they are too long. I did a search and some people used 5/16 X 2 bolts. Anyone know the correct length to be used? Also, is...
  2. B

    Edelbrock 2031 Combo

    I have a stock 1967 C-code 289 with just headers and a MSD 6AL box and was wondering if anybody every installed the edelbrock 2031 carb and intake combo. Would this kit be good for my setup? Anyone have any experience with this kit? I'm actually debating between the performer and peformer RPM. I...
  3. B

    What To Look For When Buying Used Mustang Spindles?

    I’m in the process of looking for a pair spindles and was wondering what I should look for to make sure it’s a good spindle. What the best way to check the bearing journals are in good condition. I know I’m planning to have the spindles magnaflux for strength. Any input is appreciated. Thanks...
  4. B

    1967 4 Lug Spindles Vs 5 Lug Same?

    Anyone know if the 4 lug spindles are the same as 5 lug? Are there any differences or are they the same? I know v8 spindles have a C6OA casting. Does the 4 lug spindles have different castings. Thanks.
  5. B

    Full Roller Suspension Vs Coil Overs

    I’m debating between a street or track full roller setup or coil over setup for my 67. I plan on doing some auto crossing and was wondering if anyone regrets buying there coil over setup. Anyone like the full roller setup better than the coil over setup? Any input is appreciated. Thanks.
  6. B

    Maeco Motorsport Suspension Experience?

    Anyone have any experience with Maeco Motorsport upper and lower control arms? I hear that they make good road race suspension with the stock design. Anyone have any feedback on the quality? Any input is appreciated. Thanks.
  7. B

    Kelsey Hayes Disc Vs Pbr With Granda Spindles

    Is there a difference in stopping power between the factory Kelsey Hayes disc brakes vs PBR (01+ calipers) with Granada spindles? What are the benefits between the two setups? I’m debating between the two for my 67 with manual steering. Any input is appreciated. Thanks.
  8. B

    Anyone ever use blue collar performance spindles?

    Anyone have any experience with these big bearing spindles? http://www.bluecollarperformance.com/st-bspindle.html
  9. B

    H & R wheel adapter/spacers vs Ebay spacers

    Do you buy the hubcentric spacers or non hubcentric? Thanks for the replies.
  10. B

    H & R wheel adapter/spacers vs Ebay spacers

    I just pick up some 17X8 bullitts for my 67 and now Im looking for wheel spacers/adapters. I did a search and found some people used H & R spacers and ebay spacers. I was wondering if there is a big difference between the two? Im on a budget and was considering ebay spacers but Im not sure of...
  11. B

    Who has a camera mount in their classic?

    Thanks for the reply. I already made one for an adjustable head rest. Im trying to figure out how to mount one without an adjustable head rest.
  12. B

    Who has a camera mount in their classic?

    I was wondering who has a camera mount in there car. I'm trying to fab one to mount behind the front seats in my 67. Anyone have any ideas? Any thoughts are appreciated. Thanks.
  13. B

    What temperature is considered over heating?

    I know people like an operating temperature between 190-210 degrees. I was wondering what temperature is conisdered over heating? What temperature should you avoid running the motor? Any thoughts are appreciated. Thanks.
  14. B

    Took out headlights on my 67, hard to put back on

    I just took off the front headlights on my 67 and now Im having a hard time putting them back on. I cant get the spring to stay in its place when I try to mount the head lights back on. Anyone know an easier to put the headlights back on. Is there an alternative to putting the spring back on...
  15. B

    Whats the best way to cut U-bolts while on the car?

    I just replaced my 4.5 mid-eye leaf springs with standard height springs. I put on some u bolts that are 4 inches to long. I was wondering what is the best way to cut the u bolts while on the car. I was told the best way is to use a grinder with a cut-off wheel. Also, is it safe while...
  16. B

    Whats is a good alternative to KYB gas adjusts shocks?

    I have KYB gas adjust shocks in the rear with 4.5 mid-eye leaf springs and the ride is stiff and bouncy. Im changing to 4.5 standard eye leaf springs and was wondering if there is a another alternative compared to KYB's. Does anyone have the KYB GR2's? I heard doetsch shocks are good. I also...
  17. B

    Leaf springs 65-66 fit a 67?

    Will leaf springs from a 65-66 mustang fit a 67. Im pretty sure they will. I just want to make sure. Thanks.
  18. B

    T-Lock shifter, anyone have it?

    Thinking about one of these for extra security. Does anyone have one? Was it easy to install? Thanks. Here is the link The T-Lock
  19. B

    17x9.5 on a 68 PICS

    Is that flat black paint or an epoxy?
  20. B

    Do I need to remove my front/rear windshield when removing vinyl top?

    Going to remove my vinyl top soon. Do I need to take out my front and rear windshield to take the top off?