Search results

  1. stang9gt

    Much dif between comp 252H and 260H?

    I am putting cam and exhaust on the 86 mustang motor I have in my bronco. It has 35 in tires and I want to make some better torque. I was looking at the comp 260H cam but I can get a good deal on the 252H with lifters. Would there be a noticable difference between the 260H and 252H in...
  2. stang9gt

    needed to put came from 351W into 86 roller 5.0?

    Seems pretty straight forward then. I just need the cam, lifters, pushrods for a non HO motor, a new distributer gear, and run the spark plug wires as if the motor was an 85 mustang motor.
  3. stang9gt

    needed to put came from 351W into 86 roller 5.0?

    All the good 4x4 torque cams are made for the truck motors which were all flat tappet.
  4. stang9gt

    86 302 + E7's?

    The cam I want to run is the comp 260H cause it makes really good torque for 4x4 applications.
  5. stang9gt

    86 302 + E7's?

    E7's bolt right on without any issues? PTV clearance or anything?
  6. stang9gt

    86 302 + E7's?

    I have an 86 302 mustang motor in my bronco and someone said I can put E7 mustang heads on and get some power.. This true?
  7. stang9gt

    needed to put came from 351W into 86 roller 5.0?

    I have an 86 mustang motor in my 84 bronco. I want to get the comp cam 260H 4x4 torque cam but it is for a 351W which isn't roller and my 86 5.0 is. Do I just need to get the cam and flat tappet lifters, throw them in and go??
  8. stang9gt

    Caliper Polishing questions...

    Trying to do this also!!!???
  9. stang9gt

    can any N/A stang keep up with a newer vette?

    everyone looks at 1/4 miles times...that n/a mustang isn't going to do anything to a vette on the street that traps 117 mph. Just about no n/a GT will ever do that without a power adder. You may be able to run one at the track, but never keep up with one on the street given equal driving skills.
  10. stang9gt

    Threw out a rocker arm....

    Hmm, that's funny seeing most people refer to it as that. This isn't even the point of the thread, you and everyone else on here knows what he means so just let it go and quit hijacking the thread with nonsense. The 4.6 "cam followers" do the exact same thing as the pushrod rocker arms.
  11. stang9gt

    Threw out a rocker arm....

    Had that happen twice to my car and it bent a valve on the way out the one time.
  12. stang9gt

    pics of blue stangs with black bullitt rims with machined lip?

    Anybody have a blue stang with the black bullit wheels that have the machined lip?
  13. stang9gt

    Adding extra clutch/friction to limited slip?

    Anyone add another friction pack/clutch in between the two shims on each side of the limited slip?? Instead of spacer clutch spacer spacer clutch, you would do spacer clutch spacer clutch spacer clutch...It supposed to limit the one wheel spin a little more. Just wondering who has done it and...
  14. stang9gt

    trac lock is shot! how to replace clutches??

    That sounds like a good idea but wouldn't it be bad using one of the old/spent clutches??? Anybody else do this setup that adds another friction??
  15. stang9gt

    someone photoshop??

    Can someone photo shop the yellow part of this car to sonic blue?? I am thinking of this paint scheme on my blue 96GT minus the ricer ground fx...
  16. stang9gt

    Quick question about salvage title

    My last stang was a salvage title car and I will never buy another. The state finds ways to screw you and it took me almost a year to finally get the Reconstructed title for mine. It was rediculous. You have to send in pics of the car fixed from every angle, then wait 6 weeks to get a reply...
  17. stang9gt

    trac lock is shot! how to replace clutches??

    So when I lift my car up I can rotate the tires with the trans in gear without the driveshaft spinning. Trac lock is shot. I can get the rebuild kit for 43$ (new clutch packes, shims, and lock bolt.) How do I decide which shim I need to use when I install the new clutch packs??
  18. stang9gt

    anybody run a spool on their daily driver??

    Just what the q asks....I need to rebuild my rear and was just wondering about these...
  19. stang9gt

    needed to convert to 31 spline???

    What all do I need to convert my 8.8 to 31 spline axles??
  20. stang9gt

    have 3:73's with 290ish rwhp...4:10's??

    I have about 290 to the rear wheels right now...I plan on getting a supercharger sometime over the winter for spring...would it be worth me switching my 3:73's out for 4:10's?? It won't cost me anything but parts!!