Search results

  1. PSUPef2k

    Foglight + Headlight bulb question..

    update on the fog light improvements... So I redid all female ends today, but now the left foglight won't work because the ground came loose and I can't get it back in. It is not positioned very well, so I'm going to get a slightly longer 14 gauge wire to run to a body bolt in a better, more...
  2. PSUPef2k

    Foglight + Headlight bulb question..

    :spot: the housings. :spot:
  3. PSUPef2k

    Foglight + Headlight bulb question..

    FYI, #8 or #6 screws and clips will work. Also, the female spade connectors are .110 in size, not .187. Auto parts stores only had the .187 size. I am going to go to an electronics store tomorrow and hopefully be able to get the correct, smaller size. I put the new bulbs in, but the wires...
  4. PSUPef2k

    Removing foglight lenses?

    I have several parts I need to complete and improve my somewhat ghetto foglight install. I need 2 additional clips (the metal ones that slide over the plastic holes and allow you to screw the light into it rather then just screwing onto the plastic) 2 screws to fit the clips, and also 4...
  5. PSUPef2k

    Foglight + Headlight bulb question..

    Well, I got it and sealed them and they are in. Now I have several parts I need to complete and improve my somewhat ghetto foglight install. I need 2 additional clips (the metal ones that slide over the plastic holes and allow you to screw the light into it rather then just screwing onto...
  6. PSUPef2k

    Removing foglight lenses?

    Update: They were out because the grounds were lose. I need to redo the connector female spade connector ends of the wires. They are rusted and loose and come off sometimes due to movement of the car. Anyone ever replaced the female spade connectors for the foglights?
  7. PSUPef2k

    Fogged/moisture in head/fog lights.

    Actually, I didn't have to worry about getting the housings out. The kit from mustang tuning came with brackets as well. :nice:
  8. PSUPef2k

    Removing foglight lenses?

    So I got to work today and noticed that both lights are now out. They worked last night and this morning most of the way in (I could see them reflecting in the back of the car in front of me at stoplights). Then I parked, got out, locked it and noticed they didnt blink on when I locked it like...
  9. PSUPef2k

    Removing foglight lenses?

    way too much money. I'm talking bulbs here. Anyway, the install is done, and they look GREAT! I'll get pics tomorrow.
  10. PSUPef2k

    Removing foglight lenses?

    I sealed them up with silicone last night. Now about to go give the install a try. Wish me luck. Also, I'm starting to doubt my silverstar purchase. Are they really the way to go for 9007 headlights? Any other opinions on good and bright 9007's I could get would be welcomed. I'll post...
  11. PSUPef2k

    Fogged/moisture in head/fog lights.

    Where did you get the silicon sealer? Any auto parts store?
  12. PSUPef2k

    Foglight + Headlight bulb question..

    Where did you get the silicon sealer?
  13. PSUPef2k

    Removing foglight lenses?

    Do you mean they took the actual housing, lens and all, or just the bulb? If they just took the bulb, you could order just that and re-terminate the wires. On a side note, the housings I ordered from mustang tuning came with brackets too! Not a bad deal for $79.00. Anyway, does anyone know...
  14. PSUPef2k

    Removing foglight lenses?

    I was contemplating just letting the shop do mine when I have it in for a free oil change they gave me. Just to save some time on what could prove to be a huge pain in the ass. Probably a snap for them. :shrug:
  15. PSUPef2k

    Removing foglight lenses?

    I got these from mustangtuning.com. $79.00 shipped. Any advice on removing the brackets and getting the old housings out?
  16. PSUPef2k

    Foglight + Headlight bulb question..

    I wouldn't have to worry about them melting in their would i?
  17. PSUPef2k

    Foglight + Headlight bulb question..

    where can I get the silicon to seal it?
  18. PSUPef2k

    Foglight + Headlight bulb question..

    so with bulbs: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7983884046&category=36476 and replacement foglight assembly: http://www.mustangtuning.com/clfogliset9m.htm and some silicon to seal it, I should be ok? Damn, I bet the clear lenses make the lights...
  19. PSUPef2k

    Foglight + Headlight bulb question..

    These? http://www.mustangtuning.com/clfogliset9m.htm No problems with leaking/melting?