Search results

  1. 0

    Can I upgrade my fuel pump ahead of future blower?

    Thanks much. You are a legend!
  2. 0

    Thoughts on this diff cover?

    I got this after my mechanic (drag racer) recommended it during my trans swap. Suggest you read the reviews and watch the vid - thats the best one out there. Beefy, aluminum, load bolts that provide additional support for the differential bearing caps, fill and drain ports to make oil changes a...
  3. 0

    Thoughts on this diff cover?

    Get this one: https://www.americanmuscle.com/frpp-88-diff-cover.html
  4. 0

    Can I upgrade my fuel pump ahead of future blower?

    I suspect my stock fuel pump is dying after 19 years. If I let the car sit, it sometimes wont start without many attempts. I'm going to check for power at the trunk IFS switch (found an old WMBurns thread). I plan on a blower in the future. Can I upgrade my fuel pump now while its still NA or...
  5. 0

    Returning to stock question

    You can safely return to stock. Those mods are extremely minor (ACI and catback). Thats going to be a pretty cookie cutter basic tune to grab you maybe 10hp. A tune is certainly not required.
  6. 0

    Progress thread - GT Auto to Manual Swap (and new seats!)

    You can see the hole that clutch fork dust cover goes over in the first of the under car pics.
  7. 0

    Progress thread - GT Auto to Manual Swap (and new seats!)

    Look at these beauties!!
  8. 0

    Progress thread - GT Auto to Manual Swap (and new seats!)

    MUCH lighter. The stock power leather drivers seat is pretty damn heavy. I think both stock seats are about 100lbs. I'm guessing the new seats with manual tracks weigh about half that.
  9. 0

    99 Gt Progress Build

    Damn that sounds mean!!
  10. 0

    Progress thread - GT Auto to Manual Swap (and new seats!)

    Car looks great. Seats are much lighter than stock... I'll try and get numbers. We are down to the final few items... We realized we are missing a cover plate that goes onto the T3650 where the clutch fork enters (to keep junk out). Found it on LMR... "clutch fork dust cover". My SCT Tuner is...
  11. 0

    Engine Intake Manifold Upgrade issues

    Scratch that. Its not the IAC. Your codes all point to an IAT sensor problem. I'd take that out, make sure its connected and mounted fine. Or vacuum leaks. P0113 Possible Causes Faulty Intake Air Temperature (IAT) sensor Dirty air filter Intake Air Temperature (IAT) sensor harness is...
  12. 0

    Progress thread - GT Auto to Manual Swap (and new seats!)

    You can see the lower shift boot bolted in to the modified floor cut out in the picture below
  13. 0

    Progress thread - GT Auto to Manual Swap (and new seats!)

    My friend Steve (excellent mechanic) has made a ton of progress on my car! The only real hiccup was that you need to change the cut-out in the floor pan for the T3650 to fit thru! We had read about this online, but it seemed hard to believe that the trans tunnel would be different. It is...
  14. 0

    Thinking about headers,04 gt

    They are not. Longtubes are the only ones worth doing, and you'd have to get a new mid-pipe. If you do not have gears, you should DEFINITELY get them first. 4.10s for NA, 3.73 if you plan on boost in the near future. You already have the tuner to adjust for them too.
  15. 0

    Engine Intake Manifold Upgrade issues

    Check your IAC voltage. There are many videos on the topic on You Tube.
  16. 0

    Steeda Tunes

    Get a dyno tune done locally. Thats better than anything cookie cutter online.
  17. 0

    Progress thread - GT Auto to Manual Swap (and new seats!)

    Cool. I think I'll try that then. No need to lose the PATS without a reason! Thanks again D