Search results

Well, either way, it's working again. Thanks again!

I was testing it, for the most part, using the two leads on fuse while it was still plugged into the fuse block. From now on if I suspect a fuse is bad, I will just start with pulling and testing each fuse! Thanks for all of your advice! Jon

Thanks guys for all of your help! Sorry for taking so long to reply but I finally found the problem. I again tested ALL of the fuses with no power and they all checked out fine. I checked each one to make sure it was the proper fuse and it was in the right place, and they all were. I pulled the...

You definitely aren't hurting anyone's feelings here! But yes, I have checked that numerous times. I even replaced the switch, but it made no difference. Unfortunately for the F2.37 you mentioned, the rear window defroster, fog light switch, traction control switch, and radio all work, so I...

Well I found a picture last night of the under hood and under dash fuse boxes with what each fuse goes to. I'm going to just swap out all of the fuses that have anything to do with the dash and see what happens next. Jon

Yes, I can read schematics, but no I do not have any for the wiring or know where to get them. If you have access to them I would really appreciate it! I actually did put it all back to stock with the factory CD player, but it made no difference. The radio still worked fine, but no dimmer...

Thanks for the tip... Well, I tested all of the fuses again with a multimeter and they all ohm'ed out just fine. I then did something that I had not done before and started the car with the lights on, thinking that maybe something would show different under load. Well, everything under the dash...

I'm starting to lean towards a bad cluster as well :( I just put them original Ford Mach stereo back in, eliminating any of the wiring changes I made, and it works, but the dash lights still do not work. I'll double check the fuses again, then check the wiring... then try to find a cheap used...

Wow, thanks! They are cheap! I'm placing my order now! Jon

I've been out of the Mustang scene for a couple of years due to severe duty related injuries. I finally bought a 2003 GT a few months ago and have managed to put an amazing 50 miles on the car since I bought it. Anyway, the front brakes are shot and I was going to swap in a set of Cobra...

Thanks for the tip. I've probably checked the fuses 2-3 times already now with a fuse light and pulled them out one by one, but I'll try it again with a multimeter. Any other suggestions? Thanks! Jon

I'm hoping some of you guys can help me. A month or so ago I installed a new CD player in my 2003 GT. I used a Metra 70-5519 wiring harness from Best Buy. I ended up running separate wiring to each speaker because the previous owner removed all of the amplifiers and the rear sound bar in the...

I know this is an old post, but if anyone cares, I just did this today and needed a 81 1/3" belt for a 94 GT with underdriven waterpump and crank pulley, no A/C, and no smog pump. Hope that helps someone! Jon

No big deal, I needed it quickly, so I hope it works. :D

Nevermind, bought the TFS-2500200 kit, hope it works. Jon

100 http://store.summitracing.com/default.asp?target=partdetail.asp&autofilter=1&Ntt=valve+springs&N=%2D104260&part=TFS%2D2500100&autoview=sku&Ntk=KeywordSearch 200...

Ok... then can anyone tell me if the TFS-2500100 or TFS-2500200 kits will work? Thanks! Jon

I hear you guys talking about the summit valve spring kits. I'm needing a set of springs, retainers, keepers (valve locks), and seals on E7 heads to support a B303 cam with 1.7 rockers. Can anyone provide the link or part number for a good set that includes these items. I have been looking and...