Search results

i used plastic and emblem adhesive made by 3m for the lenses and two part epoxy for the reflectors ( the part that holds the sockets)

heres mine

what is the deal with the pinched subframe? i never knew about that

the gasket sticks sometimes.you just have to start at one corner and pry carefully

i have a giha her are some pics. http://us.f2.yahoofs.com/bc/4038bece_8065/bc/mustangII/left+froont.jpg?bfx59hABTnrozqnX http://us.f2.yahoofs.com/bc/4038bece_8065/bc/mustangII/rear.jpg?bfx59hAByXZnI5OW

this is the proper procedure for adjusting the shifter. loosed the nut where the shift rod attaches to the lever on the transmission. place the shifter in the car in low possition then place the lever on the trans to low and tighten the nut

i just welded some perches to the spring brackets

i work the counter a napa have a wife which stays home with my son.and im going to school at night for electronics engineering

I thought it was just mine. all under my licence plate turns green from the water that sits there

i dont have any reverse lights.but if i installed some it would be a long thin light under the bumper so it wouldnt be very noticable

i believe the reason for the gm calipers is because the are easy to make a mount for, the gm calipers use a floating pin were the fords have to have a machined grove

how did you guys wire the three reds to get rid of the separate amber light? i tried one of the trailer light converters but it couldnt handel the amperage.so i made my own setup out of relays

you did it in three hours?you must have more appropriate equeptment than me. what did you use to cut the plastic?

i just did this mod myself.i think that is a very fair price.you would have to buy another set of lights just for the donnor lenses.then it is very labor intensive.i think ispent about 16 hours on it.then i took the chance of ruining something

what i have heard was the part about the axle housing ripping the tank and also that the doors would become jammed from the collision trapping the passengers inside

this is a giha...notice opra window

thanks for the invitation but i live too far away

thanks, but im looking for some for my power supply that im building.radio shack has some but they arent the righ values

i need an amp meter that goes from 0-10 amps and a voltmeter that goes from 0 to 35 volts dc for my power supply.