Search results

plus that too :D

I say wait till CC is done with the turbo setups, I think he'll be dine soon, adn it's rumored to be comparable in price to the KB setup. Plus you get (from what I hear) top notch service from guys who KNOW.

locktyte will solve all problems, I cracked one of my set screws too and replaced them both with SS ones and blue locktye. Use the blue because it's less perminant

Acutally all you need is a little locktite, this should be obvious since they give you a hex nut instead of a lock nut. I have set the stops all of one time in two years, which was the first time. And they are not redundant, they stop ALL pressure from even reaching the tranny, that is there...

I don't about you dude, but I am getting a headache :( To those who secnond guess the shifter stops. The stops on the shifter, stop the shift and take the impact at the shifter, not the tranny. Any way you slice it it's better for a couple 3/8 bolts to take the beating (or what ever they...

This is just rediculous, ok, everyone who has a supercharger will blow there engine due to detonation, because no one will get there car tuned. Do not get gears, you will not read out the right MPH. DO not get an O/R pipe you will get a check engine light. Get me? :bang: :bang: :bang:

Great thread!!!!! I am happy to see the NPI guys can get a little without selling a kidney! I wonder if the bullitt can bolt up?

He is full of crap, it's close to impossible to install them wrong... How hard is it to put the car in gear, touch the stop with the handle, then back off the stop a half turn? Sounds like he is implying that we are idiots. Sorry but it sounds like "most the people" he talks about is a figment...

I am sooooo sick of reading posts debating stops,. First of all, the 3650 has stops. This means nothing because the shifter still feels like jello so putting in a shifter is a good idea. Can the aftermarket stops hurt you? Um yeah if you don't set them right. Will they come loose?? Um yeah, if...

I can powershift faster than any auto I have ever been in. Powershifting IS when you you are WOT and just stab the clutch, If anything you will beat the clutch as the stock clutch is the fuse (weak link) between the engine and the tranny. I broke traction going into 4th on my way back from a...

thats called breakin traction dude:)

This is great news.If this really starts to happen big, we should start a thread with the locations of the dealerships who will and will not do the fix with a Shifter, :)

not if it was a build defect, insurance won't pay for a factory defect.

Wowo that really sucks, did he have an aftermarket stereo? Just asking, because if he did Ford will probably fight the warrantee

286 without tune, I bet CC could eek more power out

Drag radials and 31 spline axles :D Just listen for whine

Turn to spike tv, they are installing a S-trim on a 96-98 :D

Bondo, is a putty body filler. It can be had at any walmart or autozone. You will need to fill the holes, fair them out with a sanding block, and then have your trunk re-painted. This would be the right way. Or you can fill them and attempt to use touch-up , which will look worse than the emblem...

Absolutly, I have polished and ported a couple sets when I was driving Chevys and they all came out great. As long as you don't get carried away, or try to do bowl work, you will be fine, you could even slightly gasket match port the intake and exhaust side. Just remember STAY AWAY form the...

The bad your talking about is done with somthing called a Chop gun, it's brittle to a point, but can be repaired just like the cloth and matt fiberglass. It's not scrap that is used, the folicle used, is made specificly for the chop gun, I know this because I used to run one, and have built many...