Search results

  1. SVTRacer01

    Will '03 Cobra MAF bolt to '01 Cobra?

    Good point, I didn't think of that. I guess I was just thinking of a quick Ford stock bolt-on. Probably best I use a C&L or something since the car's computer is going to plug into it.
  2. SVTRacer01

    Will '03 Cobra MAF bolt to '01 Cobra?

    I have an 2001 Cobra with a 80mm MAF and was wondering if a 2003 Cobra 90mm MAF is a direct bolt-on? I also have a BBK CAI that may or may not prevent a problem with the bolt-on. Anyone know if this will work. Will the 2003 Cobra MAF make much of a difference, or would I be better off with a...
  3. SVTRacer01

    What will 3.73s do for my '01?

    A 245/40/17 tire does have the same diameter as a 315/40/17 tire, but only on the inside of the tire where it mounts to the wheel (rim diameter). The outside diameter of the two tires will be different though. The first three numbers of the tire (ie. 245, 315, etc.) are the overall width of...
  4. SVTRacer01

    What will 3.73s do for my '01?

    They need the size of the tire (diameter) in order to determine the number of revolutions the tire will make in a certain time period. I remember seeing some of this stuff in between naps during my college physics classes, so if you're interested you can check out this link...
  5. SVTRacer01

    What will 3.73s do for my '01?

    Check out this page, pretty nice. http://www.corral.net/tech/gearcalc.html
  6. SVTRacer01

    What will 3.73s do for my '01?

    I've got an '01 Cobra and always wanted to do the gear swap to 3.73, but after hearing all of you talk, I think I am set with the 4.10's. Any brands you recommend over another? Is it true that you need to install an aluminum driveshaft or else you will feel a ton of vibration? How much did...
  7. SVTRacer01

    wheel spacers

    You should just bolt them on since the studs from the spacers are offset from where your studs bolt on from the wheel hub. The installation instructions from Maximum Motorsports say that the old studs may need to be cut based on the thickness of the spacer. Did you have to cut the old studs...
  8. SVTRacer01

    wheel spacers

    There we go, it finally worked! Looks nice since I think we have the same exact car with the polished wheels. How much of a drop did you get with Eibach springs? You have a Bassani exhaust system on your car...the tips look good? How do you like the setup? Did you put on a X-pipe? Any...
  9. SVTRacer01

    wheel spacers

    Your picture won't load. :bang:
  10. SVTRacer01

    wheel spacers

    Pictures...anyone...??? :doh:
  11. SVTRacer01

    wheel spacers

    Got a picture of your friend's ride? I've been looking at getting these spacers for some time now and not really sure what size I should get. I still have the stock 17"x9" '01 Cobra wheels and 245/24/17 tires with H&R Supersport springs. I really want the rear tires to sit flush with the...
  12. SVTRacer01

    H&R Super Sports????

    Yes, the super sports will give you a little lower drop. If you call the service rep at H&R they are really helpful. I also chose the SS because the race springs are really stiff and typically not meant for the road, but for the strip or track instead. I didn't want to feel every bump in the...
  13. SVTRacer01

    H&R Super Sports????

    I put these on my '01 Cobra coupe. The set I got are powdercoated black and don't have any graphics that say H&R. They do give you a couple H&R stickers in the box that you can stick on your car. I would highly recommend these springs though - they will give you the perfect drop. I got about...
  14. SVTRacer01

    Which tires to buy

    Gotta agree with the BFG KDW's. Had them on my '01 Cobra as my last set of tires. Great handling and cornering, quiet ride, great grip both wet and dry, even wear. Only downfall was I got about 12,000 miles outta them before they were toast, but I guess that is expected out of a performance tire.
  15. SVTRacer01

    Which cat back system for Bassani x-pipe w/ cats?

    I am looking at getting a whole new exhaust system for my 2001 SVT Cobra - from the headers back. I think I have already made my mind up about getting a Bassani X-pipe with cats and now want your opinion on a cat-back system to match. I want something louder than stock, something exotic...
  16. SVTRacer01

    I want your opnion on Bumper Inserts

    I would go with the stainless steel bumper inserts if you have chrome in other areas on your car, or I would go with a dark gray or a light gray. I installed light gray on my '01 Cobra.
  17. SVTRacer01

    New tweeters for '01 Mustang

    All I want out of new tweeters are crisper and clearer highs. I added a pair of 12" Kicker Comp subs to my trunk about 6 months and they sound great. I figured that the tweeters would balance out the system quite nicely. Looking around on the web, I saw that these are 2.5" speakers, and my...
  18. SVTRacer01

    New tweeters for '01 Mustang

    I wanted to replace the small door tweeters in my '01 Cobra coupe that sit in the speaker pod, opposite the mirrors. I was wondering if anyone has done this and what kind of speakers they reccommend. I was hoping to get something better than your basic $50 speaker, but wasn't sure what. Also...
  19. SVTRacer01

    Looking to get 19" wheels on '01 Cobra, anyone have pictures?

    I am interested in getting a set of 19" wheels for my '01 Cobra coupe. Not sure what kind yet or how exactly they will look. I've seen them once on a Saleen and they looked great. I'm hoping someone has a picture of a set of 19's installed on their Mustang that they could post here or e-mail...
  20. SVTRacer01

    JL Stealthboxes....who has em?

    I shopped around forever trying to find a box that would fit in my trunk and not take up too much room. I thought about one of those tubes, but I already had a pair of 12" Kicker comp subs. The box I seriously considered was at http://www.subbox.net/, but it would only fit a pair of 10's...