Search results

exhaust and everything still on?

Ive done it once, with the motor out. Super simple. But whats the best way to address this w/o pulling the motor...or is that not an option? Thanks...

If your still running the stock air box ive got one i will sell ya. I swapped over to a carbed setup...will just need a 'recharge' they sell the kits at all parts stores... PM me

Ditto... I'm in need of a new set. I have Ford Racing 9MM wiresnow, but one decided to fight the headers and lost.

test

http://www.nologyhotwires.com/ Anyone ever coughed up the 2 bones for these? Are they really worth the money or is it a gimic?

with the ends that look like the one on the bottom right?

I pulled Autolite 764s out of my GT-40P heads. But i went to the parts store and they searched for 98 explorer it showed the 764s and then NKGs R-55s i think....so i went with the NGKs. The Autolites looked like the bottom right picture, and NGKs like the bottom left.....Now my car has a...

just make sure you still have atleast an 1" of travel at the top of the pedel until the clutch dis-engages (sp) its been a long day. The way i test mine is get up to cruise speed and just slowly push the pedal and make sure you get atleast an 1" or so down before it starts to slip....If you get...

I had a stock dizzy with Crane Ignition...No help i pulled mine off thinking it was the problem still had it. I just got the car running tonight with the Carb....ABSOLUTLY AMAZING! It may have ran this good when it was EFI if it ever ran right....but now the power is at the blip of the...

Hate to be a downer on this thread....but i had the same problem for 2 years. Then it progressed into when i slammed gears it would die. So I'm in the middle of my carbed swap. I know its no help. But I went carbed.

Also...I have a return style FP regulator. Could this be the return fuel i'm hearing? and the noise is just coming through the Carb?

Almost all done with my Carb swap. Got all the fuel FINALLY Plumbed tonight. when i hit the key Fuel pressure jumps up to 6psi, then i can hear in the carb a gurgling/passing air noise (hissing). When I hit the throttle i see fuel going in the carb. But what is this gurgling i hear? Fuel...

I'm in the middle of my EFI to Carb swap. And I priced throttle cables at the parts store and the Auto is cheaper than the 5 Speed Cable(for an 85 Stang is what I searched Under). Which one do i need? I have a 5 Speed Car, but it was orignally an AOD Car. They didnt have them in stock but...

elecrical gremlins in the EFI harness...the car has had them since i bought it and i'm tired of messing with it. I Know everyone say it wont cure your problems, but thats what i'm going to do. Its not a DD its a fun weekend car/ Strip Car. I've got my Truck to DD, just another project...

I've done quite a bit of research the past few days, read the pros and cons, read the rants and praises from others. And i'm down with the funky sound of going Carb. I've got a few questions/open for suggestions i still have out there.... You can see my current setup in my signature for...

So what kind of damage would I be looking at running without it for a little while, while i order new bushings for it.

Right behind where the driveshaft bolts up, on either side you can see bolt holes where like a brace bolts around the housing. My 'brace' was hanging lower on one side than the other and was loose. Tried tightening the bolts no avail...took it off and it looks as if it serves no purpose. I...

I"m Down in Valdosta Georgia. See a few Fox bodies running around once and a while not to many thought. Anyone else somewhere close to get together one weekend and cruise to the beach or try to get a little meet set up.

Any Idea why the relay was getting hot though?