Search results

  1. JAZ 5.0

    Engine 92 Vert Dies In Drive

    Ok, so one code and the condition of the car wouldn't trigger the rest of the codes to activate? For example, I don't think my car is running in a poor condition because all these things are wrong. It's running in poor condition because some ONE thing is wrong but because of the poor...
  2. JAZ 5.0

    Engine 92 Vert Dies In Drive

    Ok, I have codes. So hopefully this will narrow down the problem.... These codes are the first codes pulled a long time ago... KOER 94 - Secondary Air Injection Inoperative. bank two, driver side (R), Torque Converter Clutch Solenoid Circuit Failure (O) 44 - Secondary Air System Inoperative...
  3. JAZ 5.0

    Engine 92 Vert Dies In Drive

    I wrote the codes down and I'll post them up. Since I've cleared them it shouldn't have any right now. I'll run it but if I just turn it on and let it run, it runs fine. It's only when I place it in drive that it dies. I have to put it and drive and essential power brake to keep it alive...
  4. JAZ 5.0

    Engine 92 Vert Dies In Drive

    Ok, well I've dumped codes and I've gotten them all. Because it's running like sh!t all sensors are throwing a code. Clearing codes and running codes when it's just on and not dropping it in drive yields nothing. Anyone had similar experience? Any ideas of where to start looking? Replacing...
  5. JAZ 5.0

    Engine 92 Vert Dies In Drive

    Hello all, It's been a long time since I've been on this board and have returned because I'm having problems with my 92. It's a 92 GT vert with about 154k miles. Original motor. The only mods have been a Bbk catted h pipe. Flowmaster cat back. Msd distributor. (Good deal at the time) drop in...
  6. JAZ 5.0

    CODE HELP!!!

    Cool, thanks again. I really appreciate it.
  7. JAZ 5.0

    CODE HELP!!!

    Hey thanks for the help. I'll just clean up the VSS and replace the O2's. I just wasn't sure about the code 95 so that's why I was asking. I'll just clear the code and check later if it pops up again. But is code 95 Fuel Pump Secondary? because that's what the scanner referred to; does that...
  8. JAZ 5.0

    CODE HELP!!!

    Ok, well the code 29 - VSS I think is because the tranny is leaking from the VSS. So I'm not worried about that. Code 41 and 91: I'll change the O2's and see if that does it. I failed to mention my cats are toast; will that effect the O2's? and Code 95: Should I worry about it? It...
  9. JAZ 5.0

    CODE HELP!!!

    ttt
  10. JAZ 5.0

    CODE HELP!!!

    Ok, I ran some codes and I need some info on them. KOEO: 29, 41, 91, 95 KOER: 41, 91 Now, I've found plenty of info for 41 and 91. I just replaced the BAP but that didn't work. Next I'm replacing the O2's. But what about 29 VSS low and 95 said Fuel Pump Secondary. I've gotten the...
  11. JAZ 5.0

    Help: Car bogging down and backfiring!

    Ok, so I checked the timing and it was right. I replaced the wires also but still nothing. It's actually doing it much less now, but the light still comes on and turns off when I turn the car off....anyone else have any ideas...????
  12. JAZ 5.0

    Help: Car bogging down and backfiring!

    well timing was set with new distributor, but I will check it again. As far as spark, well everything has been changed...well except for the wires, but those are only 3 years old max, ford racing. I just might replace those too....
  13. JAZ 5.0

    Help: Car bogging down and backfiring!

    Ok, well now sitting on the passenger side, I can more clearly hear the "poping". It's actually coming from the air box and not the exhaust like I thought before. I don't know if that makes any difference..but maybe someone could chime in.....
  14. JAZ 5.0

    Help: Car bogging down and backfiring!

    Well if it was code 66, then wouldn't it be a hard code. I mean if the MAF was giving me a problem, then wouldn't the scanner pick it up. Also wouldn't the CE light stay on? The scanner is picking up nothing and the CE light always turns off when the car is off. I'm starting to think the...
  15. JAZ 5.0

    Help: Car bogging down and backfiring!

    The module has been replaced. I bought a MSD distributor new w/ module and pick....
  16. JAZ 5.0

    Help: Car bogging down and backfiring!

    Ok, new MAF installed and NOTHING! It didn't work; it still does the same thing. CE light still comes on. So any other suggestions of what it could be? It's getting really annoying and seeing as that I need to pass inspection next month I need to get it fixed. The only other thing I've...
  17. JAZ 5.0

    Help: Car bogging down and backfiring!

    Got MAF yesterday, I'm going to try to install it today. I'll post if this cured my problem or not.
  18. JAZ 5.0

    Help: Car bogging down and backfiring!

    Well actually mine does it more on a cold start than after it's warmed up. It's been cooling off here too, so it's cooler than normal. But it still continues to do it after it's warmed up, but by then the light comes on much sooner and so it doesn't do that as often. I'll try to change my MAF...
  19. JAZ 5.0

    Help: Car bogging down and backfiring!

    Cool, I'll be looking to get a stock replacment. Also, my car sometimes has a sudden miss. It'll miss at one light and then go away at the next.
  20. JAZ 5.0

    Help: Car bogging down and backfiring!

    Oh ya, I've also replaced the O2's as well. I had a feeling it was the MAF but wasn't sure. I'll disconnect it and see how it runs. I'll see if I can replace it; anything better than stock that I should get?