Search results

Anyone have any ideas?

After putting my engine together and running it a while I noticed that there was oil coming from my air filter. I removed the intake tube and oil was pouring out. I then removed the upper intake and there was oil on the two mating surfaces between the intakes in the middle where I suppose...

I had a similiar problem with my car. It was the IAC or whatever it is called. It is located on the the side of the throttle body. It is a long clyinder located towards the front. I ended up replacing mine with a new throttle body but before that I took it off and cleaned it out with carb...

No, the injectors are new. Do you think I should get thicker o-rings if they are available, and if so where do I get them.

There are 4 eye holes that bolt to the lower intake, but no bar

I recently upgraded my fuel injectors to 42#'s. While I was running the motor for 15 minutes, fuel started spraying from the rails. The fuel rail seperated from the injectors (I have the areomotive fuel rails.) Could the fuel pressure be to high? It is set around 38 w/ a supercharger. Or...

If you want a ball park number add the displacement per cylinder and the chamber size and divide the sum by the chamber size you roughly have a 306ci and divide that by 8 cylinders, then you probably have around a 61cc chamber, you then connert cc to ci and then divide that by that chamber...

Are these ball joints used for the 5 lug conversion when using the sn95 spindles? MOG-K8259

What's the best way to clean aluminum heads? I am so use to clean cast iron so I was thinking of using a wire wheel w/ a dremel but i am afraid I will be taking aluminum off with the old gasket material. Should I go safe and use a scraper or is there a safe solvent to use?

I heard its coming out either at the end of september or november. Bestbuy.com has an estimated date. It was orignally supposed to come out in early April but moved it back - I was ticked

I have used them both in my car. Now I have the 3.55 and I am keeping it. The gear works great with my setup.

I used the red one - I believe it is a 21 tooth. D&D performance said that these red ones are a lot stronger and accurate. I was using the white one and it was destroyed too.

M-6375-C302 - This is the 50oz one in the FMS catalog

If summit doesn't have it www.ramchargers.com will. They are in Michigan but will ship out to where ever you are, pricing is the same as summit

Ford p/n: M-6710-A50

I am currently trying to decide which water pump I want to put on my new block. I have it down to three mechanical pumps: Edelbrock Ford Racing Summit The prices for the three very form $80 to $180. Does the price reflect the quality? Do any of the pumps have a distinct advantage over...

Ford Racing has a water pump that flows 30% more than stock, I believe it is reverse rotation: p/n M-8501-B50 Summit - $174.88

I think it will fit. You can always call the dealer ship and have them check the part numbers. 91-93 have the different fenders.

The HTS coating isn't worth it go with a ceramic or jet coat. My headers rusted in less than a year and now I am replacing them. With what, I still don't know yet. As for installation, it depends how your luck is that day. I installed and uninstalled theses headers numerous times and each...

I'll make sure to let you know.