Search results

First off the car is an 89 gt with a sunroof. I was walking the junk yard and picked up a lighted rear view mirror out of a newer 95-00ish camaro. It looks just like the one in 94+ convertible mustangs. I wired the hot to the feed for the vanity mirrors, and for the dome feed I pulled...

I've got the same problem. I have replaced the switch with a new dealer part. I'll be interested to see how common this is...

Someone has to have some experience with this.

I had the same problem with mine. The soleniod in the back was unpluged. The mounting bolt was in the way of plugging it in so they just didnt. 5 minute fix.

Hey guys, ive been chasing a starting gremlin for a while. Ive narrowed it down to either a bad solenoid or a bad reman starter. Iver replaced all battery cables, solenoid and the starter. The battery was new last year. Im thinking that ive got a bad solenoid (bad out of the box). Which brand...

did you ever figure out what the problem was?

hey i took the hvac control panel off today and the cable broke. Does anyone know where to find a replacement.

When I installed my 3g alternator, I used the pulley from my stock alternator. The stock pulley was only about 1.5" and then pulley on the 3g was about 2.5". which pulley is every one else running, and what size belt are you using with all other pulleys stock and the smog bypassed. thanks

1. Low oil sensor 2. Yes, the O2 sensors are upstream of the cats. so they see the air before the cats anyway

i thought the only real difference was the cam.

im using a junkyard one. ive had it on for over a year and its going strong. they yard gives a lifetime warranty. youll get another used one for free if it fails..

the song is by adema not headstrong. but either way its a great song. oh yeah and its a sweet 5.0

i had my hatch window done at zeibart. they did a really good job and their prices were reasonable. and i think it came with a 5 year warranty

royal purple atf. smothed out the shifting over whatever fluid was in it when i bought it.

i bought a fitting at autozone that screwed into the bar on the bottom of the tubes. and the hose slid right on to that.

they use spicer 1330 u joints.

the distributor teeth dont really matter if you are pulling a 6* reading you are at six degrees.

i bought the pro3i's and i am very impressed with them. i also just used the motorsport uppers and they really changed the way the rear end handles.