Search results

Use some isoprophyl alcohol and a small hobby paint brush or tooth brush to clean electrical connectors.

The subwoofer you picked is rated at 500W x 1 RMS @ 2ohms. (or 250x2 @ 4ohms) The amp you picked is rated to deliver 400W x 1 @ 4ohms. (or 100x2 @ 4ohms, or 200x2 @ 2ohms) That sub is a dual voice coil sub and presents a 2ohm load to your amp. That amp is not designed to run in mono bridged...

Sweet! I think you'll really enjoy that setup. I've been running around with the 2000 model of that same sub since it came out. I chose to put it in a sealed box simply because it was my first attempt at building a box and it was the easiest. Ported would definitely be a lot louder but with a...

I'll offer up a couple of sugesstions to look at! First off if you are not into spending that much you are better off powering your fronts/rears with the HU for now. That way you can focus on not going too cheap on the subs and sub amp. Save up and get a nice 4ch amp for the kappas later...

I'm having one built to my custom dimensions very soon. Once I get it I'll post some pics. In the mean time here is a diagram of the design: http://www.speakeasy.org/~darkwing/pics/t112_box.jpg It's going to hold one of these...

Not the prettiest but it gets the job done for me. New sub and ported box are coming soon though! :-) Click the pics for bigger images! Rockford Fosgate 12" HE2 Sub in sealed 3/4" MDF box Kenwood KAC-X401M (600W x 1 @2ohms 14.4V) Sub amp mounted to back of sub Kenwood KAC-X541...

If you want to save some bucks you can always shop online too. You can find some good deals on eBay and online shops. Most the time you'll find the manufacturer wont offer a warranty on parts bought on the net but the money you save can often be worth it. A great place I deal with is...

Who says they need to be 2.5" speakers? Get a nice 2 or 3 way component set with 5 1/4" mid and 1" or .75" tweet. Then get a couple little "L" brackets or something similar like I did to mount the tweets! I've angled mine more towards the seat for better imaging than stock.

Keep in mind that unless your door and rear speakers are rated at 2ohms you will not be giving them 100w each. If your speakers are rated at 4ohms like you stated earlier they will be getting 50w each with this amp you are planning on using.

Your fuse should not be further than 18 inches MAX from your battery. This is for safety. Putting it in the back near the amps is the absolute worst location. Yeah you can have a distribution box with fuses back there but there still needs to be one close to the battery. I suggest you buy...