Search results

Thanks for taking the time, that's good info. I'll check that out!

I have a '67 Mustang with factory air conditioning. On regular ac the air blows out of the dash vents like it should, if I switch it to max ac it blows cold air out of the floor vents. The vacuum lines have all been replaced and appear to be run correctly. I checked the vacuum lines on the back...

I have an 06 GT and the speed volume function has stopped working. The last thing I did was install a relay for lights, I pulled the radio fuse under the hood to install a fuse tap and I plugged it back in. I didn't loose my presets but the time was wrong and I had to reset the bass and speed...

Here's my plan, I'm gonna run a title search through the DMV, hopefully they can give me some of the original owners contact info (I know from the carfax its a one owner car) and hopefully I can get in touch with them and get the original tuner for the car. If that doesn't work out I'm just...

Apparently cause I didn't change anything. Wonder if my box is defective

I installed the Pie Frd04-aux to play my ipod through the radio in my '06. It works great but it only plays through the left speakers, it plays on the right but it is so faint you can barely hear it. I tried switching the RF cables that go into the box but it still only played through the left...

I really need to know what fuse is for the power outlet on the dash on my 2006, but a whole fuse diagram would be great! My Haynes manual doesn't show a fuse diagram and it's not on the inside of either of the fuse box covers. Thanks!

I think it shouldn't be a problem for them to make it all 1000 laps. At 31 MPG and a 16 gallon tank that's 496 miles. But I'm sure they can top off the tank, have an optional 2:91 gear ratio in the car, set the cruise control at the optimal RPM and have some pre-production computer flash that...

Has anyone mounted a hidden toggle switch in thier car that needs to be set before the car will start? Seems like it would be easy to splice it into the clutch saftey switch or into the ignition circuit. Just wondering if anyone has tried it and how it worked out. Thanks.

Thanks guys the car is manual and it runs great as is but I want the predator. I guess I need to see if I have that restrictor and if not I'll get a predator and have it reflashed to stock before I use it.

I just bought an 06 GT and I want to buy the predator for it. Only problem is, I hear it can mess up the car if I use it and the car has already been tuned. I got the car from a dealer and it already has a C&L intake and flowmaster exhaust so it could be tuned already. I hear I might be able to...

I just got an 06 GT to drive daily (still have the 67) one of the first upgrades I wanted to do was put the pie frd04aux in to the factory shaker 500 so I can play my ipod on my long drive to work. Well I bought the adapter a couple weeks ago and went to put it in this weekend. It was easy to...

Does this look like it would do the job with the Ford cam? COMP Cams: Composite Gear for Ford FW Engines 0.530-inch shaft also what about pressing it onto the shaft? I don't trust just a parts bin roll pin...

Any update on how that gear worked out for you? I ran a bronze gear for a few years but after pulling the distributor it was pretty worn...

I have a late 302 roller cam motor in my '67 Mustang. Is it ok to use the bronze distributor gear? The jegs catalog says neccessity for a steel billet roller cam, but then it says do not use with a cast or steel cam with integral iron drive gear. I assume all the rollers are steel billet and I'm...

I'm really considering the scarebird disc brake conversion for my '67. Since I work in the parts industry I can get all the late model rotors and calipers CHEAP. But I have a few questions. I guess if I want to add a booster, the best choice is just a stock '67 booster? How about the master...

I've got a '67 coupe with working factory ac. Can I change the heater core without disturbing the air conditioning lines? Thanks!

I've got a sport wheel from a '77 mustang, will it fit an '86? Thanks!

I've got a sport wheel from a '77 mustang, will it fit an '86? Thanks!

I thought it looked just like the current convert roofline too. It is still in preproduction, so it may change. On the other hand, you really can't expect a convert to have a fastback roof :rolleyes: