Search results

Like title says, 75 mm professional products throttle body and elbow for sale. 130 shipped obo. email [email protected] for pics

I am kicking around the idea of doing a efi conversion on my 79 stang. what is involved to make this swap work, like what parts i need besides the fuel injection stuff and mass air harness and how would it wire up to my stock 79 ignition. any help would b greatly appericated. Jhery

Ight jus found out that my flywheel is too damn big for the stock t5 bellhousing, my question is can i use a stock diameter flywheel with a 10.5 inch clutch set up?? Any info will b greatly appericated. Thanks Jhery

ight i went to install the T5 swap in my 79 hatchback, i put the flywheel on and as im about to put on the pressure plate, the bolt holes dont match up at all. I measured the flywheel and its 14 inch across and i measured the pressure plate and its 10.5. also the flywheel is 28 0z balance for my...

I got a set of E7's if you wanna buy them. They r good for porting.

I have a 1979 mustang with a rebuilt 302 with 40k on it. My question is what flywheel do I have to use? I been told by a few sources that I need a 157T 28 0z balance flywheel. I just want to know if this is correct or not. Also I have a ford racing 50 oz flywheel that have 10k it if anyone...

I was wondering is it possible to put 1970 351 cleveland 4v heads on a 1979 302 block? Like what kinda of mods are going to be need done to make the head work. Thanks Jhery

I have a set of Mickey Thompson Sportman pros that measure 26x10.50-15. I was wondering do I need special backspacing to work on my 1979 stang. Also would I need the lip to be rolled? Thanks Jhery

once again ttt

ttt

I'm about to purchase a 87 Gt with supposely 76k on it and I want to make sure that its the right mileage. 1FABP42E9HF185653. I would reall apperciate if one of you guys can do this for me. Thanks alot Jhery

I was wonder if anyone would have a complete T5 set-up that they will be trading for 2 AOD's with a TCT 3200 rpm stall converter and Flexplate. One tranny is a rebuilt AOD with 10k miles on it, the other is a dynamics aod but OD is blown in it. I didnt know what section to put it in so i jus...

Click the link and tell me if any of you guys know the real name of these pipes cuz i jus call them mad max pipes. http://www.fastls1.com/forums/showthread.php?s=&postid=57568#post57568

Would you happen to know of any common places of vacuum leaks and if they leak is by the manifold or tb, would a new gasket fix it? thanks Jhery

How big of a hole in the throttle plate and exactly where on the plate?

lol 1st time i heard bout using shaving cream on a engine.

You can go to your local auto zone or auto parts store and picked them up. I got mine from auto zone for about 32 bucks for the both of them.

Im about to purchase a s/c 88 mustang hatchback, here is a quick run down on the mods. it has 50 lb injectors, novi 2000, in line fuel pump, mass air conv. , 373 gears, alum driveshaft w/ loop, brand new centerforce dual friction clutch , new msd wires, dart stage 3 heads, cobra r's needs new...

CARFAX found no inconsistent odometer readings in the mileage history of this 1988 MERKUR XR4TI (WF1BT80WXJM692208). Date: Mileage: 08/17/1992 52,012 09/16/1992 52,036 09/28/1994 90,683 07/14/1999 136,121 so im guessing that it is 154k

I'm about to get a 8.8 rear and the seller isnt sure if it have 3.27's or 3.55's in it. Is there a way to determine what gears are in the rear when the rear is out of the car? Thanks Jhery