Search results

  1. 1994Vib.RedGT

    Full Restoration?

    I've been away from the forum and the game for a long while. Life and whatnot. I still have my 94 GT that I got way back in 2004. It still runs and is in good shape aside from a few issues (power seat motor, power windows, seat cloth, and the rack and pinion is worn out and the wheel is...
  2. 1994Vib.RedGT

    charging issue

    the gauge hovers around 3-4 volts, and the abs light stays on and the tach dies.
  3. 1994Vib.RedGT

    charging issue

    so the other day my volt gauge dropped and the abs light came on, I limped it home where it died as I pulled in the driveway, my first instinct is the alternator, but, this only happens when the engine gets warm. Any chance of it being something else, Im going to test the alternator later this...
  4. 1994Vib.RedGT

    its time to guess my 1/4 mile time!

    the on ramp was downhill, and I didnt do the gears, they were done before I bought the car, but my GPS says the speedo is correct. And as for the tune I twisted the dizzy and played with fuel pressure, I had looked into getting it tuned but a lot of people on here as well as the speed shop...
  5. 1994Vib.RedGT

    its time to guess my 1/4 mile time!

    alright, so mods are in my signature, dyno numbers are 268/303, and I did the old on-ramp test and did 0-60 in about 4.9 and 0-90 in about 10.5, video is here YouTube - 1994 Mustang GT 0-90 part II (If I am violating the street racing rules by posting that feel free to lock the thread, though...
  6. 1994Vib.RedGT

    wobbly harmonic balancer-video!

    that sucks I just replaced the friggin thing in 2005, and i havent put 20k on the motor since then, why would it be messed up again?
  7. 1994Vib.RedGT

    wobbly harmonic balancer-video!

    YouTube - harmonic balancer so looking at that, the angle might not be as good as i originally thought, but its kinda wobbly, can anyone tell me if this is something to be concerned about?
  8. 1994Vib.RedGT

    Post Your Newest Stang Pic, 94-95 Cars Only.

    ^thats effing amazing looking heres mine:
  9. 1994Vib.RedGT

    anyone have a idle clip w/ steeda #19 cam?

    I have one too, no clip at the moment, but it sounds quite similar to Rio's clip. Thats with bassani X and flowmaster delta 40s
  10. 1994Vib.RedGT

    left side not playing loud

    so off and on my stereo will have this odd problem where the right side speakers will just blare, but the left is barely audible. I have the stock head unit and some oversize pioneer speakers, I know nothing about stereos, so does anyone have a starting point for figuring this one out?
  11. 1994Vib.RedGT

    Post Your Newest Stang Pic, 94-95 Cars Only.

    heres a few ive snapped at random, no modeling or anything
  12. 1994Vib.RedGT

    dyno numbers!

    just for comparison does anyone know what stock 94-95 cobras, 96-98 cobras, and mach 1's put down?
  13. 1994Vib.RedGT

    dyno numbers!

    I probably dont need the 24#ers, but at the time I was doing my stuff I got them pretty cheap and didnt want to leave anything on the table, and I was under the assumption 19s were good only to about 300hp, so i didnt want to push it. As for the heads, I bought them from a guy who had...
  14. 1994Vib.RedGT

    dyno numbers!

    alright, so I got my car fixed and manual tune (a/f and timing) these are my mods: mac cold air pro-m 75mm for 24's bbk 70mm tb cobra intake manifold home ported E7 heads w/ crane springs steeda 19 cam kirban afpr 24# injectors bbk underdrives mac ceramic shorties bassani o/r X...
  15. 1994Vib.RedGT

    should i bother to dyno tune

    ok, car is done, got the vaccum leaks fixed and they tweaked the a/f and timing. Ended up with 268rwhp/303rwtq. I was expecting about 265, so i was dead on.
  16. 1994Vib.RedGT

    cobra intake eddy heads

    DEFINITELY go with the RTV, I used the cork gaskets my first time around, when I started the motor for the first time I got oil pouring out of that gap. Had to take everything back off and used rtv the second time, with no problems.
  17. 1994Vib.RedGT

    Need help deciding headers

    I dont recommend the MAC headers, there is no solid flange where they meet the block, and it has caused me many blown header gaskets and headaches over the past few years.
  18. 1994Vib.RedGT

    should i bother to dyno tune

    alright, so im getting the exhaust leak fixed, and while they were there turns out my valve covers were leaking oil big time, and where my lower intake had been chipped and had a piece come off three years ago, apparently the guy that re-weld it effed it up big time and its been causing a vaccum...