Search results

Installed Anderson Powerpipe on my 1999 Procharged GT. The result is codes P0172 and P0175, banks 1 and 2 running rich. Took the MAF off and gave it a good cleaning. Reinstalled, cleared original codes, went for another test drive and got the same codes again. Thinking my MAF may have died...

Thank you.

Car is a Prochaged 99 GT. Idols just fine when the AC is not in use. Turn on the AC and the idol dips to the point where it will stall the car sometimes. With the AC on the car feels like its bucking, as though the engine is having trouble turning the compressor. It feels like the engine...

Yellow 1999 Mustang GT, 5 speed. Grey cloth interior. Only 47,XXX miles on original motor. Intercooled P1SC Procharger pushing 8lbs of boost. Lightning green top injectors Accufab throttle body and plenum. 2001 Cobra front bumper cover. 2003 Cobra wheels. 275r Nitto Drag radials. Boxed upper and...

Found it. For the record in a 1999 gt the restraints control module is located behind the radio in front of the shifter. There is another module of some sort (help me out here) that is directly in front of it (closer to the shifter). The restraints control mod had three, 10mm nuts holding it on...

Thanks for the reply. Help me out with "DLC"?? Thanks again.

Pulled my radio out to access what I thought was the airbag computer behind it bolted to the body. Turns out I wasted my time....wrong computer. So before I resume the search, can anyone point me in the right direction? Is it under the center console? Passenger seat? Thanks.

Chrome yellow 1999 Mustang GT, 5 speed. Grey cloth interior. Weekend car. Only 47,XXX miles on original motor. Intercooled P1SC Procharger pushing 8lbs of boost. Accufab throttle body and plenum. 2001 Cobra front bumper cover. 2003 Cobra wheels. 275r Nitto Drag radials on the back. Boxed upper...

Had a bit of disaster with my front brakes. Let the car sit for too long and the rust on the rotors actually heated my front drivers side caliper to the point where the boot melted. Let me tell you, its not fun doing a complete front brake job in a parking garage!! Long story short, I still...

I could'nt find that belt guide on the net. Just for the hell of it I checked back here and Mr. Stinchcomb was already on it. Thanks buddy. :worship:

Thanks for your replies gentlemen. Its always nice to get some info from people with experience. Part #ers are always a huge help. Thanks again.

While under my car yesterday (99 GT) I noticed something strange. It seems my serpentine belt is riding about a third of the way off the belt tensioner pully. What I mean by this is the belt is definatly not centered on the tensioner pully. It is actually about 2/3 on the pully with the...

Thank you for your replies guys. Sorry if I was not specific enought with the part that I need. I was refering to the peice that would fit where the running horse and honeycomb were when my GT bumper was on. I noticed after doing the swap that the stock horse and honeycomb did not fit anymore...

Just wondering if this is possible or if there is not enough room. I don't want to put the cobra emblem in the grill. Any suggestions? thanks