Search results

Valentine One

roller rockers use bearing at the pivot point and at the valve stem, regular rockers just slide metal to metal at the pivot and valve stem. thier purpose is to reduce friction. Installing them depends on the engine and type of rocker. It may be as easy as bolting them on or it may require...

Nothing would be an easy bolt in. The front suspension on a Fox is a strut type, and not the best design. It is one of the first things people get rid of if they are serious about the handling of thier car. You'd be better to modify the existing front suspension of your 67. As far as rear...

plasma cutter, quik, easy and clean. a little pricy to buy for a one time job but you can probably rent one.

I have personal experience with all of these cars. These cars are all very good but, but some serve different functions. Figure out what the most typical use of the vehicle will be. Example; if the folks carpool regularly with other adults you can rule out everthing but the Maxima, Altima and...

did you check the obvious? :D if your electrical tester said it was mis-firing it probably isn't fuel related.

to many moving parts to be really feasible...but, continuing on with the idea...along the lines of a two stroke for int/ex but the top of the cylinder is another piston driven by a cam of sorts

you need to remove the pistons to cut valve reliefs.

Gear ratio can increase the acceleration of the car within reason. With a stock engine and stock circumfrance tires I wouldn't go much past a 3.5:1. The more gear you put in the vehicle the more rpm's it will turn at a given speed in relation to what it currently turns. 3.50's will turn about...

Braded brake lines will not make the car stop better but will require less effort to achieve the same stopping power of rubber hoses. With less flex in the hose you will get better pedal feel, it won't feel spongy. Firewall flex would be due to the leverage put on the master cylinder through...

you have the wrong spacer, it should be about 3 inches.

Window removal is not need for a good tint job. If the rear window is removed and tinted when you re-install it the rubber seal will cover the tint. If you have any problems with the tint you would have to remove the window to re-tint it.

I just got done doing a 3 month dealer training program with the G6. It's actually a good little car. First solid small car GM has built. They finally learned something from the Japanese with this car. The interior is pretty good but I think a GT Mustang owner would be disappointed with the...

I've seen a 05 mineral gray mustang inside a dealer's shop in Detroit. I did not see it in direct sunlight. It is high metallic with a lot of bronze/copper in it. It almost looked like a chrome illusion color mixing bronze, silver and copper. Lighting and the angle you looked at it really...

How much are the seats/radio/speakers/spare tire worth? seats/radio/speakers/spare tire? anywhere from 30-50 lbs And yes, I'll be ordering new suspension bits and lowering the car. Hopefully I can get a good set up that allows me to be semi-comfortable and have crazy amounts of grip and...

Without spending money on lighter parts the main weight reduction would be to remove whatever you don't think you need. Before you start gutting your vehicle think of the vehicles main intended use and if you ever plan on selling it. What type of "track stuff" are you going to be doing, drags or...

the aluminum short block is the same as the 03-04 Mach 1, bore and stroke are unchanged.

Dealer's like referrals. Don't you think they can make that decision?

I'll be in Atlanta in two weeks, who did you deal with?