yes you're correct you'll see where they are supposed to seat in on the control arm and on the body.. If i remember correctly also the flat part on the spring faces up.
are you still breaking the motor in? A friend of mine re-did his and didnt let the rings seat in, he beat on his car and he had blow by because of that.
I had the same problem. Ground out the wire for your sender and the gauge should should go up all the way(3/4). if it doesnt theres either a wiring problem or a gauge problem. after thats done check pressure if its good then your sender is bad which is less than 10 bucks. good luck
Just the other day my car started to make a loud tick from the right side of my car. You can here it through the intake rather loud and out the #1 exhaust port as well as through the exhaust on the right side.. Anyone ran into this before?? It is only when the car is at operating temp. and...
I just hooked up my pinoeer premier deck yesterday... When you turn it on or change the station it the speakers pop loud once.. Then there is a high pitch tone. This is with out the engine running.. now my battery is in the back so there are no wires routed together accept for the rca and the...
anyone ever run braided line from the pump to the fuel rails?? my fuel line is realllllyyy rusted and i was considering it.. i was looking into the parts for it and am kinda stumped on what fitting is used to connect to the sending/return lines at the pump??
i am looking into getting new wheels and tires.. headin towards some drag radials in the rear and some welds or drag lites i have a 93 gt anyone have n e good sizes i could work with.. i was thinkin maybe 15x9 in the rear and 15x5 in the front? it is still going to be driven in the street.. and...
i have a 93 gt lookin for some input for a cam.. recent mods... 3.73s, gt-40 heads, intakes, 70mm tb, 73mm maf, 24# injectors, fms1.6rr's.. thanks
nick