Search results

  1. I

    Engine A/C Compressor 1991 Mustang GT

    Looking for a good brand compressor to replace mine. Saw one at LMR don't know the brand but I've used 4 seasons before and they are DOO.... DOOO... so I don't want to get one of those.
  2. I

    Electrical Intermittent battery/charging issue

    If you've done anything to the gauge cluster lately, like replaced the speedo, check your PCB on the back of the cluster next to the lower connector. If it's broken near that connector, your battery will not charge.
  3. I

    Drivetrain Shifter rattles at high speeds

    Check the pinion, also check the U-Joints, make sure they aren't broken/loose etc... ask me how I know :)
  4. I

    Engine Correct Gap For 1991 Mustang GT With Motorcraft Plugs

    So looking here https://lmr.com/products/79-93-fox-body-mustang-spark-plug-gap-specs It shows that the correct gap for my car (completely stock) is .054 So that's what I set the gap to... BUT... then I realized the plug I was using is NOT the "ASF-42" since you pretty much can't find that plug...
  5. I

    Electrical Stripped Ground Bolt Location for Negative Battery Cable

    What I wound up doing was to relocate the ground wire to the front of the timing cover stud and use a nut to secure it there. Then I bolted the hangar back into the same spot with a rubber grommet to get rid of the "slop" and it's tight enough that it isn't going anywhere. BUT I couldn't...
  6. I

    Electrical Stripped Ground Bolt Location for Negative Battery Cable

    Cool man thanks... gotta love 30-year-old cars
  7. I

    Electrical Stripped Ground Bolt Location for Negative Battery Cable

    Ok so I had to replace my battery cable and now I'm trying to put the bolt back through the cable and the hangar... that spot near the oil filter on the driver's side... and the bolt will not tighten. If I only put the bolt in without anything else it will get tight, but I think it's hanging on...
  8. I

    What??? Mustang Hood Insulator

    The problem is once you install it, the damn thing WILL have little tears in it after a little while. The radiator support brackets on mine wore through. I bought a new one probably 5 years ago and it still looks great aside from the couple little tears... but dropping 1k on another one and then...
  9. I

    Hvac Temperature Control Cable.

    View: https://www.youtube.com/watch?v=10uSa4Tcq98
  10. I

    Drivetrain Cruise Control Doesn't Disengage With Brake

    I THINK this might be because I swapped out the brake booster. That's the only thing I can think that would be different. But the cruise control does work... just doesn't shut off when you press the brake... you have to press "Off" on the wheel to get it to stop. Anyone know what this might be?
  11. I

    Electrical 91 Mustang GT Charged Battery No Start

    My battery died overnight when I accidentally left the hatch up so the dome light drained it. So I put it on my charger the next day and charged it fully. Drove the car to an appointment a few days after, came out and the car wouldn't start without a jump. Got home, checked voltage of the...
  12. I

    Electrical PA Performance 200A Alternator Not Charging Help!

    So I guess I'll take off the black/orange wires then :) That is how it was originally wired... without using the black/orange wires.
  13. I

    Electrical PA Performance 200A Alternator Not Charging Help!

    I spoke with PA Performance and they said I could do it either way.. with or without the black wires. Turned out to be the accelerator wire. Found a break in the PCB on the back of the cluster.
  14. I

    Electrical PA Performance 200A Alternator Not Charging Help!

    My car had, I believe, a PA Performance alternator on it before which just went bad. So I bought a 200AMP PA Performance alternator and it seems like the wiring is very different. I'm not sure because I didn't install the first PA alternator so not sure about the wiring. The new alt calls for...
  15. I

    Engine Oil Pan Gasket

    So I've got my lower intake off and am in the process of replacing the gasket when I realized a leak near the front of my oil pan as well. I've read several posts about doing the oil pan gasket on here but to be honest I'm a bit afraid of it. I have most of the things taken off of the engine...
  16. I

    Engine Intake Gasket Question

    Thanks guys!
  17. I

    Engine Metal Bar Back of Lower Intake?

    Ok cool thanks!
  18. I

    Engine Metal Bar Back of Lower Intake?

    Ok cool, would you know what the two odd bolts with the studs are for? One with a nut over the stud? I'm thinking that nut is for the coolant tube, but not positive. Don't know what the driver's side would go to