Search results

Picture 021

Picture 022

Picture 018

Picture 019

Picture 020

Picture 011

Picture 012

Picture 013

There is a round looking connector under car by the trans. Should have 3 or 4 wires. That plug is for the neutral safety switch and the reverse lights.

See this motor has been built before. Long story how I got the car. Its bored .060 over which I dont like. The car ran great before had a lot of electrical issues. I have torn the car apart and replaced all the wiring harnesses. not sure which 351w heads they are. Stupid question what is PTV...

Have a 87 stang. 302 with 351 windsor heads. E-303 cam with 1.7 rockers. I have 2 questions. First are the 1.7 fine with the e-303 cam or are 1.6 beter and why. Second is, the car was a 5 speed I am turning into an auto. I am biulding a bad a.. trans for it. Can I use my harmonic balancer or...

Go to the parts store and ask for 5/16 metal brake line. Get it long and by a tubing bender and bend the lines So they will fit and look good. Junkyard trannies never work.AOD's are good trannies if the person that is building it knows what they are doing and they do it right

If you didnt disconnect the TV cable from the throttle body than you shouldnt have to adjust it. Have you check the fluid since you put a different converter in. You said it was slipping first then it stopped. Check the fluid level.

Yes the tranny is broke the od band is done. Dont like to give you bad news.By the way AOD's are good if the right person builds it. One who knows what they are doing

You have to do a double flare for the lines. Just go and buy a peice of 5/16 metal brake line and a 5/16 compression fitting and replace it. That is easier

Put your original case fitting on the junkyard trans. You have two fittings. A case fitting and a cooling line fitting. If the line leaks from where the line goes into the cooling line fitting itself then the flare is bad. Its 5/16 line. Go to the parts store and buya peace os 5/16 metal brake...

Either the TOB is bad or the fork or the pivot ball or the the front collar is no good. What you can try is to put more freeplay in your pedal. I had the same problem and I put more freplay in the pedal by adjusting the cable and my noise went awat. I had already replaced all the above once and...

Get under the dash and push the pedal down with your hand wile looking at the pedal assembly and the firewall.

Do you have the TB installed correct on the fork.