Search results

  1. Rynb15

    Engine f4te (f150)cam in a foxbody.

    Gotcha . figured that would be to easy. I'll probably just leave it alone until I figure out exactly what I want to do. Thanks.
  2. Rynb15

    Engine f4te (f150)cam in a foxbody.

    I have an 85 gt. Carbed 302. Bottom end is from a 95 f150. Top end is from original 302 in the mustang. So i assume my motor has the f4te cam in it. This is a project car and i have lots of other things to do before I tear into the motor. Besides a couple oil leaks motor seems to run good and...
  3. Rynb15

    Engine mid/high rpm stumble, idles good.

    brakes, wheels and tires. Then might get to drive it down the road!
  4. Rynb15

    Engine mid/high rpm stumble, idles good.

    Update on this for anyone following, still was not getting spark at the plugs even though I had spark at the coil wire.Tthe cap on the distributor wasent fitting right, seemed a little loose. It had an adapter to make it HEI style. I found the other cap in a box of parts with the female socket...
  5. Rynb15

    Engine mid/high rpm stumble, idles good.

    so today after work i went and got a new ignition switch. I took out the old one and it fell apart in my hand. So put the new one in and it didnt start. Then i put a new ignition module and nothing. Checked for power with a test light, flashes when cranking, light dims when on run.(Should have...
  6. Rynb15

    Engine mid/high rpm stumble, idles good.

    So does the ready to run distributor get rid of the ignition control module? So just a distributor and coil?
  7. Rynb15

    Engine mid/high rpm stumble, idles good.

    Its currently has a cheap generic distributor on it now. About 5 years old but no miles. Im sure the motor has lots of miles, not original to the car. Motor is stock, i just got the car. Trying to put it back together. I might look into a ready to run distributor. I plan on getting a new motor...
  8. Rynb15

    Engine mid/high rpm stumble, idles good.

    miss starts over 3k. i gapped the plugs to .045, thats what i read for a 85. Im in the process of getting this car running. plugs are black but not wet. still adjusting the carb. but it would always start right up and idle no problem until i swapped the coil.
  9. Rynb15

    Engine mid/high rpm stumble, idles good.

    well i went and replaced the coil. Then it would not even try to start. Just crank. So I went to put the old coil in just to see if it would start and see if the new coil was bad. It would not start. And then starter got stuck cranking even with the keys out. Luckily I just installed a battery...
  10. Rynb15

    Engine mid/high rpm stumble, idles good.

    Its cheap enough I'll just replace it to see what happens. I'll try to get a timing light on it tonight. What should it be, around 30-35? 3000rpms? Thanks
  11. Rynb15

    Engine mid/high rpm stumble, idles good.

    Hey guys, got an 85 gt, carbed 302. I took over someone elses project. Stock 95 f150 bottom end, with the 85 gt top end. Edelbrock 600cfm carb. bbk shorty headers. Last owner did install new distributor, durapsark and accel coil. Then it sat several years after this. I have the right firing...
  12. Rynb15

    Picked up an 85gt, need help with year of motor in car/firing order

    thats probably the best way to make sure i get it right. thanks.
  13. Rynb15

    Picked up an 85gt, need help with year of motor in car/firing order

    Hello, I picked up a 1985 gt project car. Lots of stuff to put back together on this car.But car is staright, not rusty and has a decent interior. Car has a f150 bottom end installed with the 85 mustangs top end. (previous owner did this)The number i got off the block by the starter is 5f30...
  14. Rynb15

    What brand clutch to get?

    This is for a friend, he has an 87 gt. Its has longtubes, cold air intake,4:11s. basic stuff. The clutch just basically exploded one day at the track. He plans on modding the car more but nothing more than 400hp max. Also going to get an aluminum flywheel. What do you guys think would be the...
  15. Rynb15

    By far one of the best videos I have ever seen.....(750hp fox)

    camaros imo are better looking than mustangs. Now i know this is a ford site and i own a ford. And i love my little fox. But i grew up and got over the war between cars. They are both cool and not made in japan.
  16. Rynb15

    GM and Ford Merger possible ?

    sweet, mustangs will finally be fast:D
  17. Rynb15

    MSD Digital 6 question?

    i would save up and get the one with the retard feature. But sorry i can answer your question.
  18. Rynb15

    cold air intake...WTF!!!!

    ya i had to unbolt mine to get it to fit.
  19. Rynb15

    Quick smog delete question.

    Ok i installed my headers and pulled out a lot of the smog stuff. Now the pipe that runs behind the heads i can just unbolt and put in thermactor plugs right? Does anyone know what size they are and where can i get them? Autozone? Now to the smog pump. Can i just buy a new belt and forget about...