Search results

I sold my Mustang and have no need for the these fuel rails. I have a pair of Aeromotive Red fuel rails as well as the stock fuel rails for the 86-93 mustang that have been converted to fit on a 351w. I paid well over $350 for the Aeromotive rails and will sell for $200 plus shipping. The stock...

I forgot to add the Stage 3 Comp cam and 1.6 roller rockers........

I have a 393w in my 94 gt and would like to know if anyone can tell me how much power i will get out of it. Here is what I have but no tune yet. 75mm throttle body 24 lb injectors 4340 rods superflow heads with 220cc intake runner 2.02/ 1.6 10:1 compression Edelbrock matched intake...

Can anyone help me please?! I got a 351w in a 94 mustang that keeps throwing belts. The first one was a stock piece and it threw it the I fond that it was too long. Next I got one a inch shorter and it was thrown. I am all out of thoughts. Any help is apprieciated......:bang:

Timing is fine also but I am not getting anything. What else could it be?

the starter engages the flywheel fine but it turns briefly then stops. I checked to see if my rails are leaking but they arr not. What else could cause it not to start. My battery is fine and I checked my grounds and still nothing:bang:

Can anyone tell me what the torque is for t he main caps for a 351w?

I replaced the starter and it turned fine for awhile but I discovered that there is a small leak at the fule rail. Will this cause the car not to start?:bang:

If that doesn't solve the problem what else can it be...........I will check to see if this will solve the issue. Thanks everyone....

But what can the problem be...... I am very anxious to get this thing running an dstart eating some LS1's because some odd reason these guys like to talk so much smack...........:bang:

I reinstalled the stock flywheel but I had it turned down to 28oz. When I try to start it the starter acts as if it wants to turn but briefly but it doesnt turn over totally. The starter is stock and I had a fuel leak at the fuel rails but i corrected leak by installing new ones from aeromotive...

:bang: I have a 94 gt and I have just dropped a 351w in it. I am very eager to get it started and running but I cant get the starter to bolt up right on the flywheel. The flywheel I have is a 157 and I am using the stock starter and the bendix on the starter doesn't contact the flywheels teeth...

called comp cams and they have no idea what kind of can it is.

totally clueless on what that means.......TMOSS?

I bought a cam from someone that I know and he told me that it is a crane cam. I looked at the back of the cam and found the number or designation (HR80 182 12) and behind the distributor gear on the cam it has (ZE) etched in it. Can anyone tell what type of cam it is. I called crane and they...

you were right.....! that fixed the problem. one of my heated hoses were bad. thanks!

it happened after i installed the intake manifold..........

I have a 94 gt and cant find out why it is revving so high at idle 1200 to 1300. I checked for vacuum leaks and I dont have any. Can anyone tell me what is going on here...... mods: cold intake equal length headers gt40 intake with ported lower msd billet aluminum distributor msd...