gt

  1. M

    2000GT with vacuum leak behind dash

    Hello all, What is the best way to get behind the dash to repair the vacuum leak? Do I go up behind the glovebox or do I need to pull the control console for the air and stereo out? My 2000 GT has, as the title would suggest, a vacuum leak behind the dash. This is the vacuum circuit that...
  2. SuperBobby615

    Cylinder 4 damaged

    I dropped a rod into cylinder 4 and ruined the head on that side. I've taken out the rod and the rocker and spring and disconnected the injector. Can I run on 7 cylinders? Would I be better to run on 6 for a time until I replace the engine? If so, what other cylinder should I disable? Rob
  3. R

    For Sale 87-93 foxbody Gt Bumper (illinois)

    Hello I'm trying to sell my gt bumper I decided to go a different route for my car it fit perfectly onto my 93 great shape asking 250 for it I'm in central Illinois Text 2x1mv7fbfk8ndj2jfj0jfnf6dhf2j2jfj9 if you have any questions thanks!
  4. J

    2004 GT Dash Indicator Question..

    First off, I'd like to say I'm a new Mustang owner and I FINALLY HAVE MY DREAM CAR! But being a new stang owner, I am trying to learn everything 101 I can about my 2004 GT. One thing I can't find (or maybe I'm not looking around deep enough) is What dash indicators should I be seeing when my...
  5. C

    For Sale 1999 Mustang GT Limited Edition $6500

    Hi there everyone, I have a 1999 Mustang GT Limited Edition 35th Anniversary. 1 of only 250ish made in white with a convertible and a automatic, around 90,000 miles. Unfortunately the car is in need of a lot of cosmetic work but it serious sound mechanically, she has a dented rear left quarter...
  6. A

    Help with value

    Hey yall, Im looking into trading my 2011 GT for a fox body and I found one, but unsure of its value and whether it would be a good trade. 93 GT Hatch with a Tangerine Orange paintjob, 351w stroked to 408 with a DSS kit, ATI powerglide with a Neal Chance 3800 stall, custom bullet cam, muffler...
  7. C

    What's it Worth? Is this trade worthwhile?

    I’ve got a dark metallic 1986 SVO that currently has a bright green 1992 LX hood and front bumper on it, 95,000 miles snd minimal mods (cobra brakes, SN95 spindles, and FMIC). Car in question is a bone stock, dark green with cloth interior 76,000 mile 1996 GT that appears to have a straight body...
  8. S

    Replacing stock tires and wheels on my 04 Mustang GT

    So I've been meaning to get new tires and wheels for my 04 Mustang GT, and I wanted to turn it into a tribute car of the SVT Cobra R. I was thinking about getting the cobra style wheel with a squared setup of 265/40/18's all around. I haven't seen anyone do this before so I'm wondering if it...
  9. 04 gt

    04 gt

    Under construction
  10. sac95gf

    95 gt abs sensor compatibility

    I have a 95 gt and the abs sensor came on yesterday. i ran the codes and its 33 so i need to replace the front left abs speed sensor. i have been looking all morning and can not find any motorcraft ones for 95, only 97 and up. anyone know if a Motorcraft BRAB65 is compatible for a 95? and if not...
  11. G

    Engine 1993 GT keeps stalling after 30 seconds to a minute when sitting

    Hello, I recently purchased a 1993 Mustang GT. I haven't been able to register it yet due to the DMV being closed because of the quarantine. I have been letting it run in my driveway every couple of days. Yesterday it randomly stalled after 30 seconds of running. I turned it on again, same...
  12. I

    1988 Mustang possible transmission shuddle?

    Hey guys, new to the forums. Not too long ago, my car began to buckle under deceleration. 1988 mustang gt AOD. Seems like if I let it coast under 30 to 35, it starts to buckle. At first, i thought it might have been a bad motor mount that was broken and making the engine rock around upon...
  13. rx79gez8gundam

    1996-1998 4.6L SOHC Engine Harness Connector C210 Pinout

    I spent several hours searching without luck for the 42-pin C210 engine harness pinout without luck. Since I ultimately had to trace each wire by hand I decided I would document my work for future reference and post it if anyone else needs it. I have a new edge harness I will also trace when I...
  14. R

    Stock crank limit numbers?

    So I've read everywhere that the stock internals will be teetering with death around 450hp, the only thing I'm wondering is the 450 to the crank or the wheels? I'm ordering a on3 kit at tax time and am unsure about the hp numbers I was thinking about running enough boost to hit 400 hp but if its...
  15. P

    HELP! Bought a 2004 4.6L Swapped mustang

    I bought a mustang”gt” it was listed however I went to see it and realized it was a base 2004 with a 4.6l swapped engine and tranny with it I bought it anyway but now I’m trying to figure out why there’s so many codes regarding open circuits in cylinders as well as when I press the break or turn...
  16. 5

    New guy

    Hello fellow horsemen. I hope thru this group I will understand how to unleash my stang 2001 conv gt 5.0 to it's full potential.
  17. Hudson N

    Auto trans not engaging after braking

    I've got a automatic 2004 gt, the transmission shifts fine, not particularly smooth, but acceptable. After braking hard without stopping like entering a corner, the transmission let's go like it's in neutral and wont re-engage for a second or two, it will just rev up freely and then snap back...
  18. B

    Throttle Body Squeaking

    Hey guys first time poster, 2003 GT owner I am getting a squeal when I just lightly tap the gas, that is the only time it squeals. No squeal when at idle. It sounds like it could be air whistling but its very high pitched and sounds like a squeak or squeal. I changed the belt and Idler pulley...
  19. 9

    Please help!! 1997 Ford mustang GT Pi head confirmation

    Hi I have a 1997 GT and I decided to do a PI intake swap and the gaskets needed no modding and the intake sat perfect but I noticed that the non Pi intake I took off, the gaskets didn't line up correctly and we're actually partially in the intake holes. Is this a clear representation that I have...
  20. D

    2006 Ford Mustang Running Lean and Rich Problem (Need Advice)

    Hello, I am new to posting on forums and this is the first time I ever made an account to post a Thread, so sorry if I am doing something wrong. I tried searching for this problem but came up with no real answer to my situation. Around July I purchased a 2006 Ford Mustang GT...