heads

  1. jeannelle101

    Best block / parts for Turbo build

    Hey guys, I was in the final stages of putting an on3 turbo kit on my 04 mustang GT. Then a leakdown and compression test showed that I have some pretty bad rings in cylinders 3 and 6. So instead of tuning I want to build the engine. My goal is somewhere around 800whp. I want to keep it...
  2. 9

    Need Help on what I need - New to the game

    Hey people. I am new to the fox game and I am looking to put some money into my car. I am working with a bone stock 92 5.0 LX. this car runs strong and really does not have any issues. any help on what I should do first to the car would be great. I am looking to make a nice weekend driver and...
  3. Nick Bos

    E7TE heads on a 1970 302 block

    Hey guys! I have a guy offering some $50 E7TE heads from a 95 302 and I was curious if they will fit on my 1970 302 block. I’m running an Edelbrock performer intake and Edelbrock 650cfm carb with hooker headers and everything else is completely stock. I’m planning on porting the E7TE heads out...
  4. MoDriver

    SOLD 1964 Ford 260 C4OE Head, Mustang, Comet, Mercury

    ///Sold/// Listed is a Ford Motor Company (FoMoCo) head for a Ford 260 V8. This head is identified as C4OE-O and includes valves, valve Springs, retainers, etc. assembled. The date code on both heads is 4F19 (June 19, 1964), so the intake valve is understood to be 1.67 and the exhaust valve is...
  5. T

    Low Dyno Numbers Help!

    hopefully somebody can point me in the right direction. So over the past month are so I installed trick flow twisted wedge 170 heads along with and Anderson n-41 camshaft in my 93 cobra. I had matt moss port my lower cobra intake to match the heads. Here’s where I’m stumped.. I took the car to...
  6. PakstinN

    Engine Ported Gt40p's??

    Hey boys, a short while ago I had the misfortune of snapping the crank in my gt40p headed 302 (how/why it snapped I have no idea) so I am currently going through the rebuilding process to get her back on the road..I already have a shortblock all done up and ready to go..HOWEVER, when the crank...
  7. acoddo

    How Much Hp/tq Will These Upgrades Get Me?

    Alright gents, this weekend is finally when I'm starting to add some power under the hood. I'll attach some pics of what I'm running now, and the hardware going in. Wondering how much power gain I'll see from all this stuff, the big three are: 1993 cobra intake F303 cam Aluminum GT40 heads BBK...
  8. T

    H/c/i With Hp/tq Numbers

    just wondering what some of you guys that have swapped the H/C/I what you swapped it for and what you got for specs on the dyno and rpm range
  9. H

    Engine Head Gaskets Again

    Alright guys long time no post. Last time I posted I was fishing out a bolt from the dizzy hole thanks to my brother. So a little recap of what I've been dealing with Blew my head gaskets. Bought new heads. Lower intake wasn't on right. Than dropped bolt down dizzy. So I got my car back...
  10. RacerJames

    What's The Difference Between My Early 351 W Heads?

    I have 2 351W heads. 1 D0OE and 1 C9AE. It's my understanding that they have the same valves, combustion chambers and ports, pressed in positive stop rocker studs, and all the bolt locations match. so, can y'all please explain the differences between these two castings?
  11. S

    E-street Heads & Cam?

    I bought a set of Used Edelbrock E-Street heads. Model number 5023. I am completely redoing the entire valve train on the heads with the exception of the guide plates and Exhaust valves. I have read where you can not run a hydraulic roller cam with these heads.. any ideas why? If I redo the...
  12. S

    Engine Stuck/seized Tfs Aluminum Head

    Hey, as I am sure most of you can to relate at some point, im most of half-way through a job and hit a damn brick wall. My 95 302 had been going through radiators and just generally giving me grief and she finally decided it was time I replace the head gaskets. driver side head came off just...
  13. S

    Engine Trick Flow Twisted Wedge Heads, Stage 2 Cam, 1.7 Roller Rockers, Will It Work?

    Will a set of twisted wedge heads with 1.7RRs that I got for free and a stage 2 track max cam work without PtV problems. Another question. With a JLT cai, stock manifold (gonna get one later) 70mm throttle body, headers, and a flowmaster exhaust, What size injectors will I need with this stuff...
  14. Last Call Racing 4.6 All Motor 3v S197 Mustang 7500RPM!

    Last Call Racing 4.6 All Motor 3v S197 Mustang 7500RPM!

    GoPro - Last Call Racing 4.6 All Motor S197 Mustang vs LS1 Trans Am at Music City Raceway 1/8 mile. The fastest time to date is a [email protected] 90 on factory tires. Also it went a [email protected] 92 on 275/60/15 ET Streets. This car Makes incredible power in the upper RPM range especially. It pulls hard well...
  15. Last Call Racing Cammed All Motor S197 Walk Around - Comp 127600

    Last Call Racing Cammed All Motor S197 Walk Around - Comp 127600

    GoPro - Jonathan of http://www.LastCallRacing.com All Motor 3V S197 walk around and exhaust clip. The car has a 4.75L 11:1 MMR1000 Shortblock. It's an awesome motor that LOVES to rev, unlike the 5.0 strokers that are too much stroke. Ported Heads, Comp 127600 SPR stage 3 Cams, that make...
  16. Last Call Racing All Motor 3v 4.75L S197 Stock Tires 8.12@90

    Last Call Racing All Motor 3v 4.75L S197 Stock Tires [email protected]

    GoPro - Jonathan of http://www.LastCallRacing.com Cammed All Motor 4.75L 3V S197 at Clarksville Speedway Dragstrip 1/8 track. The car has a 4.75L 11:1 MMR1000 Shortblock. It's an awesome motor that LOVES to rev, unlike the 5.0 strokers that are too much stroke. Ported Heads, Comp 127600 SPR...
  17. Last Call Racing All Motor 3v S197 Mustang 6400RPM Launch Break

    Last Call Racing All Motor 3v S197 Mustang 6400RPM Launch Break

    GoPro - Jonathan of http://www.LastCallRacing.com Cammed All Motor 3V 4.75L S197 Mustang GT. The first pass I launched at 5900 rpm and the car bogged pretty hard. It went a [email protected] Came back and tried to launch a little harder and broke the rear end. Should be in the 11's soon with a 4.56 and...