manual

  1. 93CalypsoConvert

    Fox T5 Speedo Gear Came Loose

    My speedo gear popped loose in my transmission the other day. I can stick my finger in the hole and I can feel the gear towards the back of the tail housing, but I can't feel the little metal retaining clip. Do I need to take this thing apart again and get it out? I'm kinda afraid it will find...
  2. 93CalypsoConvert

    T5 Main Shaft Repair

    Hello. Tore apart my transmission and found some concerning things. Here is my 1-2 slider (be ware) This is one of the most chewed up sliders I've seen. I don't even know how this got this way... Synchro was fine. Probably because previous owner beat the hell out of it. Other side (1st gear)...
  3. 93CalypsoConvert

    Fox Here we go. New Transmission Tomorrow.

    I need help trying to decide what the best option is for my transmission. Its a 1993 lx 2.3 swapped to a 5.0. The tranny is the original t5 WC and it needs a rebuild (whining, bad syncros, oil looks like a pound of glitter was poured in). I've done some research and it looks like I've got a...
  4. Eilermoon

    Trans 5th gear whine

    Hey all! i just recently replaced my shifter with a short throw and love it! But about a week after install, my 5th gear began whining. It's only in that gear, when i shift to 4th at the same speed ~55mph, it goes away. I haven't heard this before the swap but it also didn't happen immediately...
  5. 93CalypsoConvert

    Unknown t5 whine

    I know this topic has been done to death, but I have a problem that I cannot seem to relate to any other threads. So my t5 only whines in 1st and 2nd. All the other gears act like any other transmission. The previous owner rebuilt the engine, but got the transmission built by someone else. He...
  6. S

    Constant chirping noise from clutch/trans!!!

    So about a month ago, I noticed this chirping noise coming from my engine bay. At the time, it only happened right when releasing the clutch pedal and accelerating in gear, didn’t matter which gear, and sometimes it would happen when revving I’m neutral, without touching the clutch pedal. And it...
  7. B

    Need some help cars not right

    all right I got a 97 mustang 3.8 L V6 that cranks and barely sputters when you tap the gas. if I don’t tap the gas it will just crank. It has spark and fuel pump kicks on. spraying some starter fluid in it makes it act like its flooded. The antitheft light comes on for one second then goes off...
  8. C

    Need a pdf of the 1998 Gt factory service manual

    Does anyone have a pdf or a link to one of the original ford factory service manual? I have the Haynes one but I know Ford used to make an official one that I've found on multiple sellers. Problem is, the physical books are almost $100 each. Found here...
  9. K

    Please Help!! Shifting from 1st to 2nd

    Howdy boys. Just bought a ‘17 3.7 6-speed and I’m having trouble smoothly shifting from 1st to 2nd. I’ve had manual cars before but this is my first manual mustang. I find that if I take off slowly then I can shift smoothly from 1st to 2nd but when ur at a light who has time to go that slow...
  10. B

    WTB/Trade WTB - New Edge GT Manual - Detroit, MI

    Looking for a '99 through '04 Mustang GT manual. No V6 swapped or auto swapped cars. I'm specifically looking for White or Green cars, but would be happy with black, gray, yellow, or the later mod year torch red. No burgundy! I'd prefer as stock as possible, but will look at the mods included...
  11. S

    Old Foxbody owner looking to own again.

    Hi Everyone, :coff: My name is Paul and I live in Reno, NV. I used to own an 89 GT Hatchback in the 90's when I was in my 20's and then got married at 25 and had to sell her due to moving to San Diego and the stricter smog policies. She was slightly modified without cats and that was around...
  12. A

    How should I go about getting to 600hp?

    I have a vortech supercharged 2006. It's pushing 460 to the wheels and 450 tq. I want to get it to around 600, however, I know there are measures I need to take before then. I was wondering if these steps were reasonable. On 10psi from 3.6 pulley. Long Tube headers and X pipe in a two weeks...
  13. D

    Speed shifting from 1st-2nd-3rd grinds and reverse guard/lockout broken?

    Hi everyone. I just bought a used 2012 5.0.with 69k miles. I love it, but I ran into an issue today. It’s almost like the safety feature for reverse is broken. If I push down on the shifter, it doesn’t let me go passed the lockout and up into reverse, but instead puts me into first gear. If...
  14. 0

    Progress thread - GT Auto to Manual Swap (and new seats!)

    Researching these forums has been really helpful for me, so I'll leave some details of my trans swap to maybe help others down the road. Car 2001 GT Auto - 1st owner, 60k miles. I bought most of the following parts 10 years ago, and then took a break from modding the car while my kids were...
  15. A

    Car stutters at takeoff and in reverse

    I have a 2005 Mustang Gt manual. Today when leaving to work, I put my car into reverse as I always do and my car started stuttering as if I didn’t have the clutch fully engaged, kinda sounds like the gears are grinding, same story when I put it in 1st gear to take off. If I rev it higher it...
  16. T

    Clutch going bad or something else? Please help

    2009 base model. V6 manual trans. So, I started noticing some grinding of gears (all gears. Shifting up) when I shift. If I shift slowly, there is no grind. It just takes a brief pause after I shift out of a gear before I shift into the next gear, and then there is no grind. So, I came to my...
  17. Whitcraft

    Drivetrain 2002 trans noise when clutch is released.

    My 2002 mustang is making a whining noise when the cluch is engaged. I just got the car and noticed the speed sensor is not the same one that came with the 2002 so I believe I have an earlier models transmission like a 98. I dont know how to tell for sure. I took a video of the noise hoping...
  18. S

    '95 Gt Manual Steering Conversion

    I am swapping a 393w into my '95 GT and I have some problems with my current steering set up.. the power steering pump off of my 5.0 is leaking pretty bad, the boots on my factory rack are shot, and I would have to buy a FRPP bracket to put my power steering pump onto my Windsor block. What do...
  19. Kaileb9350

    Expired [for Sale] Competition Orange 2004 Mach 1 Mustang / 19,600 Original Miles

    This Mach is 100% ORIGINAL AND UNMODIFIED. I’m selling to downsize and prepare for a wedding. Actual miles. I’m the 3rd owner. Competition Orange-1 of 895 manufactured with manual trans. This car is mint, no tears inside, dash is perfect, no sun fade on door panels. Has original owners manual...
  20. C

    Mustang 2003-04 Oem Subframe Connectors

    Hello This maybe a topic that has been discoursed before; Nevertheless, none of the threads that I've found so far have the answer I need. I have a 2003 mustang v6(manual) and I'm trying to put subframe connectors on it. I know that the OEM are not the best ones, but they are way better that no...