new edge gt

so my 2002 gt 5 speed is throwing a code for lean in banks 1 and 2 and one for high evap pressure I thought this was injectors because it sounded bad but sounded to be running rich to i replaced the injectors and then cleaned the ICV due to an idle issue and replaced the gasket. Now the code is...

So I just recently bought a 2000 GT and I’ve noticed that the ergonomics were designed for someone who’s about 5’5. I’m about 6’0-6’1 and the seating position is awful. My knees hit the wheel when shifting and my arm is fully extended and can barely reach the shifter. It seems my torso needs to...

Morning guys, I'm installing SR Performance Caster Camber plates today in preperation of lowering my car in the future. My front end suspension is stock and I'm running 18'' wheels. What specs should I give the shop? It's my everyday driver so I'm just looking for driveability and maximum tire life.

So I am on leave for Christmas currently and have to return to base by the 4th. I figured it would be a great time to change my throw out bearing and clutch since the bearing was making a lot the infamous squeaking noise. I got everything apart and out all the way down to the pilot bearing. I...

How hard is it to drop a new long block 4.6l into a 2001 Mustang GT. I have some nasty bottom end rod knocks and just would rather put a new engine in myself. I know I'll need to get an engine cherry picker, and probably some new tools but I have a lot of tools available to me. My question is...

Ok so I have a 01 mustang gt that I’ve done a ac delete on and I’m wanting to do get rid of the ps as well. It’s not a daily. The car will be trailered so I don’t care about not having the ps. I know I have to switch to manual breaks which I am in the process of doing. But my question is. Do I...

Hello, I have an 02 mustang gt auto with 195k miles, and the problem I’m having is a knock coming from the very bottom of the motor (possibly transmission) that only happens at idle in gear (at 600 rpms) and cannot be heard AT ALL from the top of the engine in the engine bay. The moment I even...

Hey guys, I'm new to the forum, I haven't been able to find much relevant information online about this issue, so here it is. My 2001 Mustang GT recently developed a lean condition on both banks (Codes P0171 and P0174). I got the engine replaced a couple months ago, the engine has about 98k...

Hello fellow StangNet members. I wanted to say hi and let you know I am eager to learn new things about my mustang as well as yours. I have a 2000 Mustang GT Coupe 5 speed in Satin Silver over Dark Charcoal Leather. I purchased it little under 4 years ago from the original owner who never did...